Double-Thread Furniture Cam Connector Bolt Set — Bright metal connector bolt with coarse threaded sections at both ends, shown separately and with an eccentric cam and white polymer insert. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Bright metal connector bolt with coarse threaded sections at both ends, shown separately and with an eccentric cam and white polymer insert. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Double-Thread Furniture Cam Connector Bolt Set |
|---|---|
| Current Product Configuration | Bright metal connector bolt with coarse threaded sections at both ends, shown separately and with an eccentric cam and white polymer insert. |
| Primary Form | Three-part furniture connector using a double-thread bolt between a panel or insert interface and an eccentric cam. |
| Head / Interface | Confirm cam cavity, bolt head and neck, both threaded sections, center shank, insert bore and installed projection. |
| Thread / Mating Part | Two coarse threaded sections are shown; confirm each diameter, profile, pitch, length, mating material and required engagement. |
| Current Appearance | Bright metallic bolt and cam with a white polymer insert shown; confirm metal materials, finishes, insert resin and color. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel thickness, face bore, edge hole, insert hole, centerlines, thread engagement, bolt projection and cam orientation. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Matched bolt-cam-insert sets or compartment kits can be reviewed with approved component ratios, labels and instructions. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Three-part cabinet panel joints | Coordinate both threaded interfaces, cam capture and panel-hole centerlines. |
|---|---|
| Flat-pack furniture kits | Control the component sequence, matched ratio and installation instructions. |
| Replacement connector programs | Compare the original bolt, cam, insert and drilled panels before approval. |
| OEM furniture hardware packs | Separate components by item code and protect threads and visible surfaces. |
Buyer Guide
| Why must both threaded ends be specified? | They may engage different materials or components and require separate geometry and engagement confirmation. |
|---|---|
| How is bolt projection selected? | Use panel section, thread engagement, insert position, bolt shoulders and cam capture depth. |
| Can the insert be changed independently? | Only after its bore, retention, panel hole and bolt engagement are revalidated. |
| Can joint performance be inferred from the photos? | No. Define the complete panel joint and the required test method. |
Quality Control
| Double-thread bolt | Inspect both thread forms, shank, shoulders, head, straightness and finish. |
|---|---|
| Cam and insert interfaces | Check the capture cavity, insert bore, retention and mating dimensions. |
| Panel assembly trial | Verify holes, engagement, projection, cam closing, pull-up and release. |
| Set audit | Confirm component ratio, identity, label, instructions and compartment separation. |
Packaging & Customization
| Packaging Format | Matched bolt-cam-insert sets or compartment kits can be reviewed with approved component ratios, labels and instructions. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Why must both threaded ends be specified? | They may engage different materials or components and require separate geometry and engagement confirmation. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Matched bolt-cam-insert sets or compartment kits can be reviewed with approved component ratios, labels and instructions. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Complete bolt, cam and insert drawings or samples |
|---|---|
| RFQ 2 | Both thread forms, lengths and mating materials |
| RFQ 3 | Cam-head interface and installed projection |
| RFQ 4 | Panel thickness, holes, centerlines and joint section |
| RFQ 5 | Materials, finishes, insert resin and test method |
| RFQ 6 | Set quantity, component ratio, label and packaging |
MOQ: 10,000 pcs per confirmed specification
Furniture cam connector set with a double-thread bolt, eccentric cam and polymer insert. Confirm interfaces, panel holes, engagement, finish and packaging.
