Self-Tapping Shelf Support Peg with Protective Cap — Short metal shelf-support pegs shown with coarse screw-in threads, cylindrical bearing sections and translucent protective caps. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Short metal shelf-support pegs shown with coarse screw-in threads, cylindrical bearing sections and translucent protective caps. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Self-Tapping Shelf Support Peg with Protective Cap |
|---|---|
| Current Product Configuration | Short metal shelf-support pegs shown with coarse screw-in threads, cylindrical bearing sections and translucent protective caps. |
| Primary Form | Screw-in furniture support peg combining a self-tapping panel thread with a shelf-contact bearing section and optional cap. |
| Head / Interface | Confirm threaded end, shoulder, bearing diameter and projection, cap bore and outside profile, retention and shelf contact. |
| Thread / Mating Part | Coarse screw-in thread shown; confirm diameter, profile, length, point, pilot hole, panel material and engagement. |
| Current Appearance | Bright, dark and yellow-toned metallic variants with translucent caps are shown; confirm materials, finishes and cap resin. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm cabinet panel material, pilot hole, insertion depth, support projection, shelf thickness, contact and spacing. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after component identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Cabinet shelf support points | Coordinate thread, pilot hole, projection and cap contact. |
|---|---|
| Shelves requiring a protected bearing surface | Confirm cap material and interaction with the actual shelf. |
| Replacement screw-in pegs | Compare thread, shoulder, projection, cap and panel hole. |
| OEM furniture hardware packs | Control peg-cap ratio, variant, count and labels. |
Buyer Guide
| How is the pilot hole selected? | Use thread geometry, panel material, insertion depth and installation trial. |
|---|---|
| What must be confirmed about the cap? | Define bore, outside profile, retention, resin, color and shelf-contact function. |
| Can different finishes share one specification? | Only after material, finish and acceptance are confirmed for each variant. |
| How is projection measured? | Reference the seated shoulder to the approved shelf-contact point. |
Quality Control
| Threaded peg | Inspect thread, point, shoulder, bearing section, straightness and finish. |
|---|---|
| Protective cap | Check dimensions, retention, molding condition, color and surface. |
| Panel and shelf trial | Verify pilot hole, seating, projection, contact and specified test. |
| Pair and pack audit | Confirm peg-cap ratio, variant, count, label and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after component identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| How is the pilot hole selected? | Use thread geometry, panel material, insertion depth and installation trial. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after component identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Peg and cap drawings or samples |
|---|---|
| RFQ 2 | Thread, point, shoulder and projection |
| RFQ 3 | Panel material, pilot hole and insertion depth |
| RFQ 4 | Shelf material, thickness, contact and spacing |
| RFQ 5 | Metal finish, cap resin and color |
| RFQ 6 | Pair quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
Self-tapping metal shelf support peg with optional translucent protective cap. Confirm thread, panel pilot hole, projection, shelf contact, finish and packaging.
