Rubber-Sleeved Screw-In Shelf Support Pin Set — Bright screw-in shelf support pins shown with cylindrical translucent sleeves or caps, individually and as a mixed loose set. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Bright screw-in shelf support pins shown with cylindrical translucent sleeves or caps, individually and as a mixed loose set. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Rubber-Sleeved Screw-In Shelf Support Pin Set |
|---|---|
| Current Product Configuration | Bright screw-in shelf support pins shown with cylindrical translucent sleeves or caps, individually and as a mixed loose set. |
| Primary Form | Threaded furniture support pin combining a metal screw-in end with a sleeved bearing section for shelf contact. |
| Head / Interface | Confirm threaded end, shoulder, support diameter and projection, sleeve bore, outside profile, retention and shelf contact. |
| Thread / Mating Part | Short coarse screw-in thread shown; confirm diameter, profile, length, pilot hole, panel material and engagement. |
| Current Appearance | Bright metal pins with translucent sleeves shown; confirm metal material and finish, sleeve resin, hardness, color and surface condition. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm cabinet panel material, pilot hole, insertion depth, support projection, shelf thickness, contact position and support spacing. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Pins and sleeves can be supplied assembled or separated in counted bags or kits after component ratio and protection are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Cabinet shelf support points | Coordinate thread, pilot hole, projection and sleeve contact. |
|---|---|
| Shelves requiring a soft contact surface | Confirm sleeve material, hardness and interaction with the actual shelf. |
| Replacement screw-in support pins | Compare thread, shoulder, projection, sleeve and panel hole. |
| OEM furniture hardware bags | Control assembled state, component ratio, count, label and carton. |
Buyer Guide
| What must be confirmed about the sleeve? | Define bore, outside profile, retention, resin, hardness, color and shelf-contact requirement. |
|---|---|
| How is the pilot hole selected? | Use the confirmed thread, panel material, insertion depth and installation trial. |
| Can support capacity be inferred from the photo? | No. Define the shelf, support spacing, cabinet panel and required test method. |
| Should pins and sleeves be packed assembled? | Specify the preferred assembled state, component ratio and protection method. |
Quality Control
| Metal support pin | Inspect thread, shoulder, support section, projection, straightness and finish. |
|---|---|
| Protective sleeve | Check bore, outside geometry, retention, molding condition and damage. |
| Panel and shelf trial | Verify pilot hole, insertion, projection, contact and the specified support test. |
| Set and pack audit | Confirm pin-sleeve ratio, assembled state, count, label and protection. |
Packaging & Customization
| Packaging Format | Pins and sleeves can be supplied assembled or separated in counted bags or kits after component ratio and protection are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| What must be confirmed about the sleeve? | Define bore, outside profile, retention, resin, hardness, color and shelf-contact requirement. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Pins and sleeves can be supplied assembled or separated in counted bags or kits after component ratio and protection are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Pin and sleeve drawings or approved samples |
|---|---|
| RFQ 2 | Thread, shoulder and support projection |
| RFQ 3 | Sleeve geometry, resin, hardness and color |
| RFQ 4 | Panel and shelf materials, holes and support spacing |
| RFQ 5 | Metal finish, installation method and test criteria |
| RFQ 6 | Assembled state, quantity, label and packaging |
MOQ: 10,000 pcs per confirmed specification
Screw-in shelf support pins with translucent protective sleeves shown as loose components and a set. Confirm thread, panel hole, shelf fit, sleeve and packaging.
