Angled Double-Head Furniture Connector Bolt — Silver-colored bent connector bolts shown with two smooth shank sections, a formed angle and rounded or reduced capture ends. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Silver-colored bent connector bolts shown with two smooth shank sections, a formed angle and rounded or reduced capture ends. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Angled Double-Head Furniture Connector Bolt |
|---|---|
| Current Product Configuration | Silver-colored bent connector bolts shown with two smooth shank sections, a formed angle and rounded or reduced capture ends. |
| Primary Form | Double-ended furniture connector component designed to engage confirmed cams, sockets or prepared panel interfaces at an approved angle. |
| Head / Interface | Confirm both end-head profiles, shank diameters, bend angle and radius, leg lengths, shoulders, installed orientation and mating clearances. |
| Thread / Mating Part | No external thread is visibly confirmed; specify every mating cam, socket, bore and retention feature by drawing or approved sample. |
| Current Appearance | Bright silver-colored metal is shown; confirm base material, forming route, finish, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panels, holes, mating connectors, required orientation, insertion path, access, joint movement and buyer-specified assembly test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Angled knock-down joints | Match both ends, bend geometry and mating components to the approved joint section. |
|---|---|
| Furniture corner connections | Confirm orientation, clearances and insertion sequence. |
| Replacement connector programs | Compare the complete bolt and every mating interface with approved samples. |
| OEM connector packs | Control orientation, set ratio, count, labels and surface protection. |
Buyer Guide
| Which angle and lengths are required? | Provide the drawing or sample with bend angle, radius, leg lengths and tolerances. |
|---|---|
| What mating parts are needed? | Identify each cam, socket, hole or retention feature and its installed relationship. |
| Can the visible finish define the material? | No. Confirm material, forming route, finish and service requirement. |
| How is joint function approved? | Use representative panels and mating components for a buyer-specified assembly trial. |
Quality Control
| Formed geometry | Inspect bend angle, radius, leg lengths, straightness and end alignment. |
|---|---|
| End interfaces | Check head profiles, shoulders, surfaces and mating clearances. |
| Joint trial | Verify insertion, orientation, capture, movement and buyer-specified test. |
| Pack audit | Confirm variant orientation, count, labels and protection against bending. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Which angle and lengths are required? | Provide the drawing or sample with bend angle, radius, leg lengths and tolerances. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Connector drawing or approved sample |
|---|---|
| RFQ 2 | End profiles, bend angle, radius and leg lengths |
| RFQ 3 | Mating cams, sockets, holes and joint section |
| RFQ 4 | Assembly sequence, orientation and access |
| RFQ 5 | Material, finish and corrosion requirement |
| RFQ 6 | Quantity, labels and protective packaging |
MOQ: 10,000 pcs per confirmed specification
