Product Overview
| socket set and button head screw sample pack | Silver socket set screw forms and yellow-toned button-head screw forms shown in resealable bags. Final thread, length, head, material, finish, count and packaging require confirmation. |
|---|---|
| Buying context 1 | The photographed forms are sample configurations and do not establish grade, coating, corrosion performance or a final size range. |
| Buying context 2 | Each bag or screw form requires an approved part number, thread specification and count. |
| Procurement note | Thread diameter, pitch and tolerance; Length, head or headless form and end geometry; Mating tapped hole or nut and engagement; Hex-key size and tightening method; Material, finish and acceptance criteria; Bag count, label, barcode and carton artwork. |
Specifications & Custom Capability
Use the photographed configuration to identify the product and packaging form. Final components, quantities, dimensions, materials, finishes and packaging are confirmed against the approved bill of materials, drawing, sample or purchase specification.
Current Product Configuration
| Product Type | Socket Set and Button Head Screw Sample Pack |
|---|---|
| Gallery Configuration | Silver socket set screw forms and yellow-toned button-head screw forms shown in resealable bags |
| Screw Forms | Internal-hex set screw and button-head screw forms shown |
| Head & Drive | Headless socket set and button-head internal-hex forms may be included; confirm each line |
| Thread & End | Machine-thread forms shown; confirm diameter, pitch, length, tolerance and end geometry |
| Packaging Format | Resealable clear plastic bags shown |
| Current Appearance | Silver and yellow-toned metallic appearances shown; confirm material and finish |
| Mating Thread | Specify tapped hole or mating nut diameter, pitch, tolerance and engagement |
| Installation | Confirm hex-key size, tightening method, seating, engagement and acceptance criteria |
| Material | Confirm according to drawing, sample or purchase specification. |
| Sizes & Quantities | Confirm the complete component schedule and count; photographed labels, dimensions and pack quantities do not define the order. |
Custom Manufacturing & Order Review
| Customization Scope | Compatible thread diameter, pitch, length, head or headless form, internal drive, end geometry, finish, count and bag artwork can be reviewed against the mating thread and assembly. |
|---|---|
| Manufacturing Capability | Compatible thread diameter, pitch, length, head or headless form, internal drive, end geometry, finish, count and bag artwork can be reviewed against the mating thread and assembly. |
| Made-to-Drawing | Available for review with component drawings, joint or installation section and packaging layout. |
| Made-to-Sample | Available for comparison with representative fasteners, mating parts, substrate and approved pack sample. |
| Custom Specification Review | Confirm mating thread, engagement, screw geometry, material, finish, tightening method, count and packaging before quotation. |
| Packaging & Private Label | Use separate resealable bags or approved alternative packs with controlled item codes, counts, labels and protective master cartons. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample made to the proposed component BOM and packaging specification. |
| Custom Thread Range | Machine-thread components from M1 to M12 can be reviewed where compatible with the confirmed screw or connector form, mating thread and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed for compatible screw components according to subtype, diameter, head geometry, pack format and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed component material, service environment and acceptance requirement. |
Applications
| Machine assembly sample packs | Match diameter, pitch, length, drive and end form to the tapped component. |
|---|---|
| Furniture and fixture hardware packs | Confirm mating insert, engagement, head clearance and installation tool. |
| OEM development samples | Separate candidate screw forms under approved item codes and labels. |
| Private-label component bags | Approve bag size, count, label, barcode and cartons after the screw schedule is fixed. |
Buyer Guide
| How is the mating thread confirmed? | Specify diameter, pitch, tolerance, engagement and tapped-hole or nut requirement together. |
|---|---|
| Does appearance confirm material or corrosion resistance? | No. State material, finish, service condition and acceptance criteria in the purchase specification. |
| How should length be selected? | Use the joint stack, required engagement, clearance and approved drawing. |
| Can different screw forms share one bag? | Only when the approved BOM, identification and count prevent component mixing. |
Quality Control
| Thread geometry | Inspect diameter, pitch, tolerance, length, lead and end form. |
|---|---|
| Head and drive | Check head dimensions, socket geometry, tool fit and seating where applicable. |
| Mating fit trial | Verify hand start, engagement, seating, tightening method and removal with representative parts. |
| Pack audit | Verify item code, count, bag seal, label, barcode and carton marks. |
| Acceptance basis | Relevant testing can be reviewed according to the buyer's specified substrate, mating parts, installation method and acceptance criteria. |
Packaging & Customization
| Packaging plan | Use separate resealable bags or approved alternative packs with controlled item codes, counts, labels and protective master cartons. |
|---|---|
| OEM review | Compatible thread diameter, pitch, length, head or headless form, internal drive, end geometry, finish, count and bag artwork can be reviewed against the mating thread and assembly. |
Frequently Asked Questions
| Is the order limited to the photographed configuration? | No. The gallery records the current photographed configuration. Final component types, sizes, quantities and packaging require an approved specification and sample. |
|---|---|
| Can compatible screw sizes be customized? | Machine-thread components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, mating part or substrate, geometry, pack format and purchase specification. |
| Are material grade and rust resistance confirmed by the photos? | No. Provide the required material grade, finish, exposure condition, test method and documentation for review. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed component material, service environment and acceptance requirement. |
| Can the package and label be customized? | Yes. Submit the final component BOM, layout, count statement, insert copy, barcode and artwork for review. |
| What is required for quotation? | Send the component BOM, drawings or samples, substrate or mating parts, installation requirement, packaging artwork, quantity and acceptance criteria. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
| Quotation request | Send the following product-specific information so JH Fix can review an accurate specification and quotation. |
|---|---|
| RFQ item 1 | Thread diameter, pitch and tolerance |
| RFQ item 2 | Length, head or headless form and end geometry |
| RFQ item 3 | Mating tapped hole or nut and engagement |
| RFQ item 4 | Hex-key size and tightening method |
| RFQ item 5 | Material, finish and acceptance criteria |
| RFQ item 6 | Bag count, label, barcode and carton artwork |
| Contact | Get a Quote | Send Drawing / Sample | WhatsApp |
| Datasheet | Available after specification confirmation. |
Silver socket set screw forms and yellow-toned button-head screw forms shown in resealable bags. Final thread, length, head, material, finish, count and packaging require confirmation.
