Folding Concealed Shelf Support Bracket — Silver-colored folding shelf brackets shown with a slotted wall plate, pivoting twin support arms and a separate dark adjustment or locking member. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Silver-colored folding shelf brackets shown with a slotted wall plate, pivoting twin support arms and a separate dark adjustment or locking member. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Folding Concealed Shelf Support Bracket |
|---|---|
| Current Product Configuration | Silver-colored folding shelf brackets shown with a slotted wall plate, pivoting twin support arms and a separate dark adjustment or locking member. |
| Primary Form | Concealed shelf bracket intended to mount to a confirmed wall and support a prepared shelf through a pivoting arm assembly. |
| Head / Interface | Confirm wall-plate outline and slots, pivot geometry, arm length and section, adjustment or locking member, shelf recess and movement clearance. |
| Thread / Mating Part | Confirm all pivot pins, adjustment threads and separate wall or shelf fasteners against the approved bracket assembly and installation drawing. |
| Current Appearance | Bright silver-colored bracket components and a dark adjustment member are shown; confirm materials, finish, color and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm wall substrate and anchors, shelf material and thickness, recess geometry, bracket spacing, movement envelope, service direction and buyer-specified load or cycle test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Concealed display shelves | Match bracket spacing, wall fixing and shelf recess to the approved layout. |
|---|---|
| Fold-away storage shelves | Confirm pivot clearance, stop position and buyer-specified cycle test. |
| Wardrobe shelf systems | Coordinate the wall plate, arm projection and shelf preparation. |
| OEM bracket packs | Control bracket side, fastener ratio, instructions, labels and protection. |
Buyer Guide
| Which wall and anchor data are required? | Provide substrate, anchor method, hole pattern, edge distances and installation drawing. |
|---|---|
| How is the shelf prepared? | Confirm material, thickness, recess profile, bracket spacing and movement clearance. |
| Can a load or cycle rating be inferred? | No. State the complete installed system and buyer-specified load and cycle test. |
| Are separate fasteners included automatically? | No. Identify every anchor and shelf fastener in the approved bill of materials. |
Quality Control
| Plate and arm geometry | Inspect outline, slots, arms, pivots, stops, edges and visible defects. |
|---|---|
| Movement and adjustment | Check pivot travel, clearance, alignment, adjustment and locking behavior. |
| Installed assembly trial | Verify wall mounting, shelf fit, movement envelope and buyer-specified tests. |
| Finish and pack audit | Confirm component set, surface, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Which wall and anchor data are required? | Provide substrate, anchor method, hole pattern, edge distances and installation drawing. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Bracket drawing or approved sample |
|---|---|
| RFQ 2 | Wall substrate, anchors and hole pattern |
| RFQ 3 | Shelf material, thickness and recess drawing |
| RFQ 4 | Bracket spacing, movement and service direction |
| RFQ 5 | Material, finish and test requirement |
| RFQ 6 | Quantity, included fasteners, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
