Silver Cross-Drive Countersunk Coarse-Thread Screw — Silver-colored screws shown with flat countersunk cross-drive heads, pointed ends and coarse full-length threads in several photographed proportions. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Silver-colored screws shown with flat countersunk cross-drive heads, pointed ends and coarse full-length threads in several photographed proportions. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Silver Cross-Drive Countersunk Coarse-Thread Screw |
|---|---|
| Current Product Configuration | Silver-colored screws shown with flat countersunk cross-drive heads, pointed ends and coarse full-length threads in several photographed proportions. |
| Primary Form | Countersunk coarse-thread screw intended to seat flush in a prepared recess while engaging a confirmed wood or engineered panel substrate. |
| Head / Interface | Confirm head diameter and angle, cross-drive type and depth, head height, seating face, under-head transition and tool access. |
| Thread / Mating Part | Confirm diameter, coarse thread form and pitch, threaded length, point geometry, pilot hole, substrate and required engagement. |
| Current Appearance | Bright silver-colored finish is shown; confirm base material, finish system, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm fixture and substrate materials and thicknesses, joint stack, countersink, pilot and clearance holes, driver, edge distance and buyer-specified test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Flush cabinet hardware | Match countersink, fixture hole and substrate engagement. |
|---|---|
| Wood panel assembly | Confirm pilot hole, edge distance, seating and thread engagement. |
| Furniture angle brackets | Coordinate head recess, joint stack and driver access. |
| OEM coarse-thread packs | Control size variants, count, labels and surface protection. |
Buyer Guide
| Which substrate information is needed? | Provide material and density, thickness, pilot-hole data, joint stack and edge distances. |
|---|---|
| How is the countersunk head selected? | Match head diameter and angle to the fixture recess and required finished seating. |
| Does the silver color define the finish? | No. Confirm base material, finish process and corrosion requirement. |
| Are photographed proportions production dimensions? | No. Confirm all dimensions and tolerances by drawing, sample or purchase specification. |
Quality Control
| Countersunk head and drive | Inspect diameter, angle, recess, seating face and burrs. |
|---|---|
| Thread and point | Check form, pitch, length, point, straightness and damage. |
| Substrate assembly trial | Verify holes, driving, flush seating, engagement and buyer-specified test. |
| Finish and pack audit | Confirm surface, size identity, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| Which substrate information is needed? | Provide material and density, thickness, pilot-hole data, joint stack and edge distances. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Head, drive, thread, point and dimensions |
| RFQ 3 | Fixture hole, countersink and joint stack |
| RFQ 4 | Substrate, pilot hole and installation method |
| RFQ 5 | Material, finish and corrosion requirement |
| RFQ 6 | Variant quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
