Cross-Drive Mini-Fix Cam Connector Set — Silver-colored cross-drive eccentric cams shown with matching furniture dowels that have rounded capture heads and coarse panel-entry threads. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Silver-colored cross-drive eccentric cams shown with matching furniture dowels that have rounded capture heads and coarse panel-entry threads. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Cross-Drive Mini-Fix Cam Connector Set |
|---|---|
| Current Product Configuration | Silver-colored cross-drive eccentric cams shown with matching furniture dowels that have rounded capture heads and coarse panel-entry threads. |
| Primary Form | Mini-fix panel connector set intended to lock two prepared furniture panels through an eccentric cam and matched dowel. |
| Head / Interface | Confirm cam diameter and thickness, cross drive, capture geometry, dowel head and neck, shoulder, panel clearance and tightening direction. |
| Thread / Mating Part | Confirm dowel thread diameter, form and length, pilot hole, panel engagement, cam-to-dowel center distance and capture depth. |
| Current Appearance | Bright silver-colored cams and dowels are shown; confirm base materials, finish system, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm both panel materials and thicknesses, cam pocket, edge bore, pilot hole, center distances, orientation, driver and buyer-specified joint test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Flat-pack cabinet assembly | Match cam pocket and dowel machining to the approved joint. |
|---|---|
| Shelf and side-panel joints | Confirm panel thickness, edge clearance and tightening access. |
| Replacement mini-fix fittings | Compare cam and dowel geometry with representative existing parts. |
| OEM connector component packs | Control cam-to-dowel ratio, labels and finish protection. |
Buyer Guide
| Which machining dimensions are required? | Provide cam pocket, edge bore, dowel pilot hole, panel thickness and all center distances. |
|---|---|
| How is cam engagement approved? | Use matched samples and production-representative panels to verify capture and tightening. |
| Can the pictured dowel define production size? | No. Confirm all cam and dowel geometry by drawing, sample or purchase specification. |
| Does the silver appearance define the finish? | No. Confirm base material, finish process and corrosion requirement. |
Quality Control
| Cam geometry and drive | Inspect diameter, thickness, capture pocket, drive and rotation. |
|---|---|
| Dowel geometry and thread | Check head, neck, shoulder, thread form, length and straightness. |
| Panel joint trial | Verify hole machining, alignment, capture, tightening and buyer-specified test. |
| Finish and pack audit | Confirm matched set, surface, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Which machining dimensions are required? | Provide cam pocket, edge bore, dowel pilot hole, panel thickness and all center distances. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Cam and dowel drawings or approved samples |
|---|---|
| RFQ 2 | Panel materials, thicknesses and joint section |
| RFQ 3 | Cam pocket, edge bore and center distances |
| RFQ 4 | Dowel pilot hole, thread and engagement |
| RFQ 5 | Material, finish and test requirement |
| RFQ 6 | Quantity, component ratio, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
