Concealed Cam-Lock Shelf Support Fitting — Compact metallic shelf-support fittings shown with square or rounded top plates, eccentric drive openings and separate fixing components. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Compact metallic shelf-support fittings shown with square or rounded top plates, eccentric drive openings and separate fixing components. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Concealed Cam-Lock Shelf Support Fitting |
|---|---|
| Current Product Configuration | Compact metallic shelf-support fittings shown with square or rounded top plates, eccentric drive openings and separate fixing components. |
| Primary Form | Recessed furniture fitting using an eccentric cam or screw-driven interface to secure a shelf or panel connection. |
| Head / Interface | Confirm top-plate outline and thickness, body or cup geometry, cam opening, fixing screw, recess, holes and installed depth. |
| Thread / Mating Part | Confirm the separate screw or mating connector thread, engagement and access according to the approved joint. |
| Current Appearance | Silver-toned metallic components with a white polymer part are shown; confirm materials, finish and polymer specification. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm shelf and panel materials, recesses, holes, insertion direction, driver access, tightening and test method. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after component identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Concealed cabinet shelf joints | Coordinate recess, fixing parts and driver access. |
|---|---|
| Removable furniture panels | Confirm cam operation, engagement and service access. |
| Replacement concealed fittings | Compare plate, body, cam, screw and holes together. |
| OEM furniture hardware packs | Control matched parts, counts, instructions and labels. |
Buyer Guide
| Which photographed fitting is required? | Identify the selected plate and body geometry by drawing or sample. |
|---|---|
| What machining details are needed? | Provide recess and hole diameters, depths, centerlines and panel sections. |
| Can holding capacity be inferred from the photo? | No. Define the complete joint and buyer-specified test. |
| How is driver access checked? | Confirm cam orientation, opening, panel clearance and assembly sequence. |
Quality Control
| Plate and body | Inspect outline, thickness, body geometry, edges and finish. |
|---|---|
| Cam and fixing parts | Check drive, thread, engagement and mating fit. |
| Panel assembly trial | Verify recess, holes, seating, tightening, release and specified test. |
| Set and pack audit | Confirm selected variant, component ratio, count and label. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after component identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Which photographed fitting is required? | Identify the selected plate and body geometry by drawing or sample. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after component identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Selected fitting drawings or samples |
|---|---|
| RFQ 2 | Plate, body and cam geometry |
| RFQ 3 | Panel and shelf recesses, holes and centerlines |
| RFQ 4 | Mating screw or connector and driver access |
| RFQ 5 | Materials, finish and joint test method |
| RFQ 6 | Set quantity, instructions, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
