Brown Cam Lock Shelf Connector Set — Brown polymer cam housing shown with a metal eccentric cam and separate threaded connector component for concealed cabinet assembly. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Brown polymer cam housing shown with a metal eccentric cam and separate threaded connector component for concealed cabinet assembly. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Brown Cam Lock Shelf Connector Set |
|---|---|
| Current Product Configuration | Brown polymer cam housing shown with a metal eccentric cam and separate threaded connector component for concealed cabinet assembly. |
| Primary Form | Three-part furniture connector in which the eccentric cam captures the threaded connector inside a polymer housing. |
| Head / Interface | Confirm housing outside profile, cam cavity and access, connector head and neck, thread, panel holes and installed projection. |
| Thread / Mating Part | Coarse connector thread is shown; confirm diameter, profile, pitch, threaded length, mating panel or insert and engagement. |
| Current Appearance | Brown polymer housing and bright metallic components are shown; confirm resin, color, metal materials and finishes. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel materials and thicknesses, face bore, edge hole, pilot hole, centerlines, connector projection and cam orientation. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment cases or private-label packs can be reviewed after the component list, quantities, labels and carton protection are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Concealed cabinet panel joints | Coordinate housing, cam, connector and drilled panel interfaces. |
|---|---|
| Wardrobe and shelf assembly | Confirm panel thicknesses, centerlines and access for cam tightening. |
| Replacement connector sets | Compare all three components and the drilled joint as one system. |
| Flat-pack hardware kits | Control matched set ratios, item codes, instructions and compartments. |
Buyer Guide
| What defines compatibility with the housing? | Confirm outside profile, panel bore, cam cavity, access and retention. |
|---|---|
| How is connector projection selected? | Use panel sections, thread engagement, head and neck geometry and cam capture. |
| Can color identify the polymer? | No. Confirm resin, color sample and service condition. |
| What must an assembly sample include? | Use the proposed housing, cam, connector and production-representative drilled panels. |
Quality Control
| Polymer housing | Inspect outside geometry, cam cavity, access, retention and molding condition. |
|---|---|
| Cam and connector | Check capture geometry, thread, finish and mating fit. |
| Panel assembly trial | Verify holes, projection, capture, closing, pull-up and release. |
| Set audit | Confirm matched component ratio, identity, instructions, label and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment cases or private-label packs can be reviewed after the component list, quantities, labels and carton protection are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| What defines compatibility with the housing? | Confirm outside profile, panel bore, cam cavity, access and retention. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment cases or private-label packs can be reviewed after the component list, quantities, labels and carton protection are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Housing, cam and connector drawings or samples |
|---|---|
| RFQ 2 | Panel materials, thicknesses, holes and centerlines |
| RFQ 3 | Cam capture and connector-head geometry |
| RFQ 4 | Thread, engagement and installed projection |
| RFQ 5 | Polymer resin and color, metal material and finish |
| RFQ 6 | Set quantity, ratio, instructions, label and packaging |
MOQ: 10,000 pcs per confirmed specification
Brown polymer cam housing with a metal eccentric cam and threaded connector for concealed furniture assembly. Confirm panels, holes, interfaces and packaging.
