Grooved Cam Connector Bolt and Eccentric Cam Set — Bright metal furniture connector shown with an eccentric cam, a long grooved bolt body, rotating collar section and coarse threaded panel end. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Bright metal furniture connector shown with an eccentric cam, a long grooved bolt body, rotating collar section and coarse threaded panel end. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Grooved Cam Connector Bolt and Eccentric Cam Set |
|---|---|
| Current Product Configuration | Bright metal furniture connector shown with an eccentric cam, a long grooved bolt body, rotating collar section and coarse threaded panel end. |
| Primary Form | Cam-lock furniture connector using an eccentric cam to capture the shaped end of a grooved connector bolt. |
| Head / Interface | Confirm cam cavity and drive, bolt head and neck, grooves, collar movement, shoulders, threaded end and installed projection. |
| Thread / Mating Part | Coarse panel thread shown; confirm diameter, profile, length, pilot hole, panel material and engagement. |
| Current Appearance | Bright metallic cam and bolt are shown; confirm base materials, finish and visible-surface acceptance. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel thicknesses, face bore, edge and pilot holes, centerlines, collar position, bolt projection and cam orientation. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after component identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Cabinet panel cam joints | Coordinate cam bore, bolt projection, collar and panel holes. |
|---|---|
| Knock-down furniture assembly | Approve the set with actual drilled panels and assembly sequence. |
| Replacement cam connectors | Compare cam, bolt head, grooves, collar and thread. |
| OEM connector packs | Control cam-bolt ratio, item identity, instructions and labels. |
Buyer Guide
| What is the function of the grooved collar area? | Its movement and interface must be confirmed from the approved drawing or representative sample. |
|---|---|
| How is cam-capture projection selected? | Use panel sections, bolt head and neck, collar position and cam cavity. |
| How is the pilot hole selected? | Use thread profile, panel material, edge distance and installation trial. |
| Can joint strength be inferred from photos? | No. Define the complete panel joint and buyer-specified test. |
Quality Control
| Cam and capture head | Inspect cavity, drive, head, neck and mating fit. |
|---|---|
| Grooved body, collar and thread | Check dimensions, movement, shoulders, thread, straightness and finish. |
| Panel trial | Verify holes, seating, projection, capture, closing and release. |
| Pair and pack audit | Confirm cam-bolt ratio, item identity, count, instructions and label. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after component identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| What is the function of the grooved collar area? | Its movement and interface must be confirmed from the approved drawing or representative sample. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after component identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Cam and grooved-bolt drawings or samples |
|---|---|
| RFQ 2 | Capture head, neck, grooves and collar movement |
| RFQ 3 | Thread, pilot hole and installed projection |
| RFQ 4 | Panel materials, thicknesses, holes and centerlines |
| RFQ 5 | Materials, finish and joint test method |
| RFQ 6 | Pair quantity, instructions, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
Furniture connector set with a grooved bolt, rotating collar and eccentric cam. Confirm capture geometry, thread, panel holes, projection, finish and packaging.
