Square Furniture Cam Lock Connector — Compact silver-colored square cam housings are shown with cross-drive eccentric cams, open capture slots and side entries; one gray round housing variant is also photographed. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Compact silver-colored square cam housings are shown with cross-drive eccentric cams, open capture slots and side entries; one gray round housing variant is also photographed. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Square Furniture Cam Lock Connector |
|---|---|
| Current Product Configuration | Compact silver-colored square cam housings are shown with cross-drive eccentric cams, open capture slots and side entries; one gray round housing variant is also photographed. |
| Primary Form | Furniture cam lock housing intended to fit a prepared panel pocket and capture a confirmed mating dowel during knock-down assembly. |
| Head / Interface | Confirm housing outline, height and pocket fit, cam diameter and depth, cross drive, entry opening, dowel-head capture and tightening clearance. |
| Thread / Mating Part | The housing itself does not show a confirmed external thread; specify the mating dowel, its thread or panel interface and the complete connector set separately. |
| Current Appearance | Silver-colored square housings and a gray round variant are shown; confirm selected geometry, material, finish or polymer, color and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel materials, pocket and side-hole diameters and depths, offsets, mating dowel, entry direction, tightening access and buyer-specified joint test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Knock-down cabinet joints | Coordinate cam pocket, side hole and mating dowel as one system. |
|---|---|
| Wardrobe and shelving assembly | Confirm access, orientation and panel machining. |
| Replacement cam programs | Compare housing, cam, pocket and dowel with approved samples. |
| OEM connector packs | Control selected variant, component ratio, count and labels. |
Buyer Guide
| Is the mating dowel included? | Identify the dowel separately and define the complete component ratio in the approved bill of materials. |
|---|---|
| Which panel machining data are needed? | Provide pocket and side-hole diameters and depths, offsets, tolerances and panel materials. |
| Are the square and gray round parts one order item? | Treat each photographed geometry as a separate variant unless the approved bill of materials states otherwise. |
| How is capture approved? | Use representative panels and the confirmed dowel for insertion, capture, tightening and buyer-specified testing. |
Quality Control
| Housing and cam | Inspect outline, height, cam geometry, recess, opening, entry and visible surface. |
|---|---|
| Mating interface | Check dowel entry, head capture, rotation clearance and engagement. |
| Panel-joint trial | Verify machining, insertion, orientation, capture, tightening and buyer test. |
| Variant and pack audit | Confirm selected geometry, component ratio, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Is the mating dowel included? | Identify the dowel separately and define the complete component ratio in the approved bill of materials. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Cam housing and dowel drawings or samples |
|---|---|
| RFQ 2 | Selected housing geometry and cam interface |
| RFQ 3 | Panel materials, pocket, side hole and offsets |
| RFQ 4 | Mating dowel and complete connector BOM |
| RFQ 5 | Material, finish or polymer and color requirements |
| RFQ 6 | Set ratio, quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
Square silver furniture cam lock connector with a cross-drive eccentric cam and side dowel entry. Confirm pocket, dowel, panel holes and finish.
