Furniture Cam Lock and Expanding Dowel Connector — Silver-colored eccentric cam and matching metal dowel shown with a green polymer expansion sleeve and threaded engagement features. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Silver-colored eccentric cam and matching metal dowel shown with a green polymer expansion sleeve and threaded engagement features. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Furniture Cam Lock and Expanding Dowel Connector |
|---|---|
| Current Product Configuration | Silver-colored eccentric cam and matching metal dowel shown with a green polymer expansion sleeve and threaded engagement features. |
| Primary Form | Two-part knock-down furniture connector using a cam to capture the dowel while the sleeve interfaces with a prepared panel hole. |
| Head / Interface | Confirm cam diameter and depth, tool recess and orientation together with dowel head, shank, shoulders, sleeve profile and installed projection. |
| Thread / Mating Part | Confirm dowel thread or engagement form, cam capture geometry, sleeve compatibility and all mating dimensions using production components. |
| Current Appearance | Bright metal parts and a green sleeve are shown; confirm metal, finish, sleeve resin, color and approved samples. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm both panel materials, hole diameters and depths, offsets, drilling orientation, insertion sequence, cam access and buyer test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Knock-down cabinet joints | Match cam, dowel, sleeve and panel drilling as one approved system. |
|---|---|
| Wardrobe and storage furniture | Confirm access, cam orientation and panel thickness. |
| Replacement connector programs | Compare both parts, hole layout and installed projection with approved samples. |
| OEM furniture hardware bags | Control cam-to-dowel ratio, labels and assembly instructions. |
Buyer Guide
| Are the cam and dowel supplied together? | Define both components, set ratio and packaging in the approved BOM. |
|---|---|
| Which panel-hole data are required? | Provide diameters, depths, offsets, tolerances and panel materials for both sides. |
| Can the green sleeve define the resin? | No. Confirm resin, color, retention and approved sample. |
| How is the connection approved? | Use production-representative panels and a buyer-specified insertion, tightening and joint test. |
Quality Control
| Eccentric cam | Inspect diameter, depth, capture profile, recess, orientation mark and surface. |
|---|---|
| Dowel and sleeve | Check head, shank, shoulders, engagement, molding, color and retention. |
| Panel-joint trial | Verify drilling, insertion, capture, tightening, alignment and buyer test. |
| Set and pack audit | Confirm component ratio, count, labels, instructions and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Are the cam and dowel supplied together? | Define both components, set ratio and packaging in the approved BOM. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Complete connector BOM |
|---|---|
| RFQ 2 | Cam, dowel and sleeve drawings or samples |
| RFQ 3 | Panel materials, holes, offsets and joint section |
| RFQ 4 | Assembly sequence and tightening access |
| RFQ 5 | Materials, finishes, sleeve resin and color |
| RFQ 6 | Set quantity, labels, instructions and packaging |
MOQ: 10,000 pcs per confirmed specification
Furniture connector shown with an eccentric cam and expanding dowel sleeve. Confirm cam geometry, panel holes, engagement, material, finish, set ratio and packaging.
