Metal Shelf Support Clip with Retaining Screw — Bright metal shelf support clip shown with a locating peg, raised shelf stop, formed support ledge and separate retaining screw. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Bright metal shelf support clip shown with a locating peg, raised shelf stop, formed support ledge and separate retaining screw. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Metal Shelf Support Clip with Retaining Screw |
|---|---|
| Current Product Configuration | Bright metal shelf support clip shown with a locating peg, raised shelf stop, formed support ledge and separate retaining screw. |
| Primary Form | Formed shelf support fitting using a panel peg and ledge to support the shelf, with a separate screw shown for retention. |
| Head / Interface | Confirm peg diameter and length, support ledge, shelf stop, screw hole, screw head and thread, panel hole and shelf edge. |
| Thread / Mating Part | Separate cross-drive pointed screw shown; confirm diameter, thread, point, length, mating hole, substrate and engagement. |
| Current Appearance | Bright metallic clip and screw shown; confirm materials, forming route, finish system and visible-surface acceptance. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm cabinet panel material and hole, shelf material and thickness, clip orientation, screw pilot hole, clearance and assembly order. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Clip-and-screw pairs or compartment kits can be reviewed with controlled ratios, orientation protection, labels and instructions. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Cabinet shelf support points | Match peg and ledge to the panel hole and shelf geometry. |
|---|---|
| Shelf-retention programs | Confirm how the stop and screw restrain the approved shelf. |
| Replacement support clips | Compare peg, ledge, stop, screw and cabinet drilling. |
| OEM cabinet hardware packs | Control clip-screw ratios, item codes, protection and instructions. |
Buyer Guide
| How is the panel-hole fit selected? | Confirm peg diameter, insertion depth, hole tolerance, panel material and installation method. |
|---|---|
| Does the screw fasten the shelf or the panel? | Its location and function must be confirmed from the approved assembly drawing or sample. |
| Can load capacity be inferred from the photo? | No. Define the shelf, cabinet, support layout and required test method. |
| What shelf details are needed? | Provide material, thickness, edge condition, support spacing and retention requirement. |
Quality Control
| Formed support clip | Inspect peg, ledge, stop, hole, bends, edges and finish. |
|---|---|
| Retaining screw | Check head, drive, thread, point, straightness and mating fit. |
| Cabinet and shelf trial | Verify insertion, seating, clearance, retention and the specified load test. |
| Pair and pack audit | Confirm clip-screw ratio, count, protection, label and instructions. |
Packaging & Customization
| Packaging Format | Clip-and-screw pairs or compartment kits can be reviewed with controlled ratios, orientation protection, labels and instructions. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| How is the panel-hole fit selected? | Confirm peg diameter, insertion depth, hole tolerance, panel material and installation method. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Clip-and-screw pairs or compartment kits can be reviewed with controlled ratios, orientation protection, labels and instructions. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Clip and screw drawings or approved samples |
|---|---|
| RFQ 2 | Peg, ledge, stop and screw-hole geometry |
| RFQ 3 | Panel and shelf materials, thicknesses and holes |
| RFQ 4 | Screw thread, pilot hole and engagement |
| RFQ 5 | Material, finish, support layout and test method |
| RFQ 6 | Pair quantity, label, instructions and packaging |
MOQ: 10,000 pcs per confirmed specification
Metal shelf support clip with a locating peg, shelf stop and separate retaining screw. Confirm panel holes, shelf fit, load test, finish, quantity and packaging.
