Product Overview
| countersunk wood screw assortment case | A clear organizer case showing bright silver countersunk cross-drive pointed wood screws in several lengths. Final dimensions, finish, counts and layout require confirmation. |
|---|---|
| Buying context 1 | The photographed configuration presents separate length groups for timber and engineered-board fastening review. |
| Buying context 2 | Countersink angle, flushness, pilot hole and splitting behavior must be checked in representative material. |
| Procurement note | Timber or engineered-board material; Diameter and length schedule; Head, drive, thread and point; Pilot hole, edge distance and embedment; Finish and acceptance criteria; Compartment map, insert and carton artwork. |
Specifications & Custom Capability
Use the photographed configuration to identify the product and packaging form. Final components, quantities, dimensions, materials, finishes and packaging are confirmed against the approved bill of materials, drawing, sample or purchase specification.
Current Product Configuration
| Product Type | Countersunk wood screw assortment case |
|---|---|
| Gallery Configuration | Silver pointed countersunk screws in mixed lengths and a clear organizer shown |
| Primary Fastener | Silver countersunk pointed wood screw forms |
| Head & Drive | Cross recess and countersunk head shown |
| Thread / Point | Clear coarse thread and sharp point shown |
| Included Mating Parts | No separate mating hardware shown; specify timber or engineered-board joint |
| Packaging Format | Clear divided organizer case shown |
| Current Appearance | Bright silver metallic appearance; confirm material and finish |
| Material | Confirm according to drawing, sample or purchase specification. |
| Sizes & Quantities | Confirm the complete bill of materials and count per compartment; photographed labels do not replace an approved packing list. |
| Application Base | Specify timber species, engineered board, fixture thickness and joint geometry |
| Installation | Confirm pilot hole, edge distance, embedment, countersink seating, driver and trial method |
| Kit BOM Control | Assign an approved part number, size, quantity and compartment to every included component. |
Custom Manufacturing & Order Review
| Customization Scope | Diameter and length schedule, countersunk head, cross drive, thread, point, material, finish, compartment counts and private-label artwork can be reviewed against the timber joint. |
|---|---|
| Manufacturing Capability | Review screw diameter and length schedule, head, drive, thread, point, finish, counts and case layout as one kit specification |
| Made-to-Drawing | Available for review with component drawings, assembly section and compartment or packaging layout. |
| Made-to-Sample | Available for comparison with representative fasteners, mating parts, substrate and approved pack sample. |
| Custom Specification Review | Confirm timber, joint stack, size schedule, pilot hole, finish, acceptance criteria and organizer layout before quotation |
| Packaging & Private Label | Case color, compartment map, insert, barcode and outer carton can be reviewed after the screw BOM is approved |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative kit with the proposed component bill of materials, organizer and label for approval. |
| Custom Thread Range | Self-tapping components from M1 to M12 can be reviewed where compatible with the confirmed screw subtype, substrate and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed for compatible screw or bolt components according to subtype, diameter, head geometry, pack format and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed component material, service environment and acceptance requirement. |
Applications
| Furniture and cabinet repair kits | Match the screw length, pilot hole and countersink to the panel and hardware. |
|---|---|
| Timber joinery assortments | Confirm timber species, edge distance, embedment and head seating. |
| Workshop maintenance cases | Keep each screw size in an identified compartment under a controlled BOM. |
| Private-label hardware kits | Approve the screw schedule, case, insert and carton before production. |
Buyer Guide
| How should screw length be selected? | Use the complete joint stack, required embedment, point clearance and hardware thickness. |
|---|---|
| Can the head sit flush? | Confirm countersink geometry, surface condition and required flushness through representative trials. |
| Is a pilot hole required? | Determine it from timber density, edge distance, screw geometry and installation trials. |
| Can the pictured assortment be changed? | Yes. Approve the diameter, length and quantity assigned to every compartment. |
Quality Control
| Thread and point | Inspect diameter, pitch, thread depth, length, straightness and point condition. |
|---|---|
| Head and cross recess | Check head dimensions, countersink, recess geometry and driver fit. |
| Timber trial | Review insertion, splitting, engagement, flush seating and removal. |
| Pack audit | Count each compartment and verify the case, insert, label and carton identification. |
| Acceptance basis | Relevant testing can be reviewed according to the buyer's specified substrate, mating parts, installation method and acceptance criteria. |
Packaging & Customization
| Packaging plan | Use a clear divided organizer with controlled size groups, approved insert and protective cartons. Prevent mixed sizes, damaged recesses and migrating parts. |
|---|---|
| OEM review | Diameter and length schedule, countersunk head, cross drive, thread, point, material, finish, compartment counts and private-label artwork can be reviewed against the timber joint. |
Frequently Asked Questions
| Is the assortment limited to the photographed contents? | No. The gallery records the current photographed configuration. Final component types, sizes, quantities and compartment layout require an approved bill of materials and pack sample. |
|---|---|
| Can screw or bolt sizes be customized? | Compatible self-tapping components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, mating part, substrate, pack format and purchase specification. |
| Can the screws be used in every wood product? | No. Confirm timber or board type, edge distance, pilot hole, engagement and surface condition through representative trials. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed component material, service environment and acceptance requirement. |
| Can the organizer and label be customized? | Yes. Approve the screw schedule, compartment map, insert copy, barcode and artwork before production. |
| What is required for quotation? | Send the component bill of materials, drawings or samples, substrate or mating parts, compartment layout, label artwork, quantity and acceptance criteria. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
| Quotation request | Send the following product-specific information so JH Fix can review an accurate specification and quotation. |
|---|---|
| RFQ item 1 | Timber or engineered-board material |
| RFQ item 2 | Diameter and length schedule |
| RFQ item 3 | Head, drive, thread and point |
| RFQ item 4 | Pilot hole, edge distance and embedment |
| RFQ item 5 | Finish and acceptance criteria |
| RFQ item 6 | Compartment map, insert and carton artwork |
| Contact | Get a Quote | Send Drawing / Sample | WhatsApp |
| Datasheet | Available after specification confirmation. |
A clear organizer case showing bright silver countersunk cross-drive pointed wood screws in several lengths. Final dimensions, finish, counts and layout require confirmation.
