Brown Rafix Cam Connector with Steel Dowel — Brown U-shaped polymer cam housings shown with cross-drive metal cams and matching short steel dowels with coarse panel-engagement threads. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Brown U-shaped polymer cam housings shown with cross-drive metal cams and matching short steel dowels with coarse panel-engagement threads. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Brown Rafix Cam Connector with Steel Dowel |
|---|---|
| Current Product Configuration | Brown U-shaped polymer cam housings shown with cross-drive metal cams and matching short steel dowels with coarse panel-engagement threads. |
| Primary Form | Knock-down furniture connector set using a polymer cam housing to capture a mating steel dowel in a prepared panel joint. |
| Head / Interface | Confirm housing outside profile, cam diameter and depth, drive recess, opening orientation, dowel head, shank, shoulders and capture clearance. |
| Thread / Mating Part | Confirm dowel panel-engagement thread, pitch or form, insertion depth, installed projection and compatibility with the selected cam housing. |
| Current Appearance | Brown molded housings and bright metal components are shown; confirm polymer resin, color, metal material, finish and approved samples. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm both panel materials, pocket and hole diameters and depths, offsets, drilling orientation, insertion sequence, cam access and buyer-specified joint test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Knock-down cabinet joints | Match the housing, cam, dowel and panel machining as one approved system. |
|---|---|
| Shelving and case furniture | Confirm housing orientation, access and installed dowel projection. |
| Replacement connector programs | Compare the complete connector, holes and panel joint with approved samples. |
| OEM furniture hardware bags | Control component ratio, color, count, labels and assembly guidance. |
Buyer Guide
| Is the brown housing supplied with the dowel? | Define every component and the set ratio in the approved bill of materials. |
|---|---|
| Which panel machining data are needed? | Provide pocket and hole diameters, depths, offsets, tolerances and panel materials. |
| Can the brown color define the polymer? | No. Confirm resin, color range, retention and an approved sample. |
| How is the joint approved? | Use production-representative panels and a buyer-specified insertion, capture and tightening trial. |
Quality Control
| Housing and cam | Inspect molding, color, outside profile, cam geometry, recess and capture opening. |
|---|---|
| Steel dowel | Check head, shank, shoulders, thread, straightness and surface. |
| Panel-joint trial | Verify machining, insertion, projection, capture, tightening and buyer test. |
| Set and pack audit | Confirm component ratio, color, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Is the brown housing supplied with the dowel? | Define every component and the set ratio in the approved bill of materials. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Complete connector bill of materials |
|---|---|
| RFQ 2 | Housing, cam and dowel drawings or samples |
| RFQ 3 | Panel materials, pockets, holes and joint section |
| RFQ 4 | Assembly sequence and tightening access |
| RFQ 5 | Polymer, color, metal and finish requirements |
| RFQ 6 | Set quantity, labels, instructions and packaging |
MOQ: 10,000 pcs per confirmed specification
