Product Overview
| coarse-thread deck screw assortment | Yellow-toned countersunk coarse-thread pointed screws shown in several lengths for deck and timber-joint review. Final sizes, coating and packaging remain order variables. |
|---|---|
| Buying context 1 | The gallery records a mixed-length screw family without treating any pictured dimension as fixed. |
| Buying context 2 | Timber splitting, drive fit, head seating and corrosion requirements must be validated for the actual project. |
| Procurement note | Deck board and framing materials; Diameter and length schedule; Head, drive, thread and point; Pilot hole, edge distance and embedment; Coating and exposure requirements; Pack count, label and carton specification. |
Specifications & Custom Capability
Use the photographed configuration to identify the product and packaging form. Final components, quantities, dimensions, materials, finishes and packaging are confirmed against the approved bill of materials, drawing, sample or purchase specification.
Current Product Configuration
| Product Type | Coarse-thread deck screw assortment |
|---|---|
| Gallery Configuration | Yellow-toned countersunk pointed screws shown loose and in several lengths |
| Primary Fastener | Countersunk pointed deck or timber screw form shown |
| Head & Drive | Countersunk head; confirm internal drive geometry from approved sample |
| Thread / Point | Coarse thread and sharp point shown |
| Included Mating Parts | No mating hardware confirmed; specify substrate and joint |
| Packaging Format | Bulk or counted packaging to confirmed contractor requirement |
| Current Appearance | Yellow-toned metallic appearance; confirm coating specification |
| Material | Confirm according to drawing, sample or purchase specification. |
| Sizes & Quantities | Confirm the complete bill of materials and count per compartment; photographed labels do not replace an approved packing list. |
| Application Base | Specify deck board, timber species, framing material and exposure condition |
| Installation | Confirm pilot hole, edge distance, embedment, head seating, driver and installation method |
| Kit BOM Control | Assign an approved part number, size, quantity and compartment to every included component. |
Custom Manufacturing & Order Review
| Customization Scope | Diameter, length mix, countersunk head, drive, coarse thread, point, material, finish and packaging can be reviewed against the timber joint and exposure condition. |
|---|---|
| Manufacturing Capability | Review diameter, length mix, head, drive, thread, point, finish and contractor packaging against the timber joint |
| Made-to-Drawing | Available for review with component drawings, assembly section and compartment or packaging layout. |
| Made-to-Sample | Available for comparison with representative fasteners, mating parts, substrate and approved pack sample. |
| Custom Specification Review | Confirm timber, exposure, joint stack, length mix, coating, installation criteria and pack count before quotation |
| Packaging & Private Label | Bulk cartons, counted bags, tubs and contractor labels can be reviewed after the screw schedule is approved |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative kit with the proposed component bill of materials, organizer and label for approval. |
| Custom Thread Range | Self-tapping components from M1 to M12 can be reviewed where compatible with the confirmed screw subtype, substrate and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed for compatible screw or bolt components according to subtype, diameter, head geometry, pack format and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed component material, service environment and acceptance requirement. |
Applications
| Deck board fastening | Confirm board and framing species, exposure, pilot hole, edge distance and embedment. |
|---|---|
| Fence and landscape timber | Review treated timber compatibility, head seating and coating requirement. |
| Contractor mixed-length packs | Approve the diameter, length and quantity schedule for every pack. |
| Private-label timber fastener programs | Control coating, label, count and carton by approved part numbers. |
Buyer Guide
| How should the length mix be selected? | Use board thickness, required embedment, framing geometry and point clearance. |
|---|---|
| Is a pilot hole required? | Confirm from timber density, edge distance, screw geometry and representative trials. |
| Can the drive type be changed? | Head and drive alternatives can be reviewed only after tool fit, seating and application requirements are confirmed. |
| Is the yellow finish suitable outdoors? | Specify the coating system, exposure and acceptance criteria; color alone does not confirm corrosion performance. |
Quality Control
| Thread and point | Inspect diameter, pitch, thread depth, length, straightness and point condition. |
|---|---|
| Head and drive | Check head profile, recess geometry, tool engagement and seating. |
| Timber trial | Review insertion, splitting, clamp-up, seating and removal in representative material. |
| Pack audit | Verify the approved length mix, counts, labels and carton identification. |
| Acceptance basis | Relevant testing can be reviewed according to the buyer's specified substrate, mating parts, installation method and acceptance criteria. |
Packaging & Customization
| Packaging plan | Supply in controlled bulk cartons, counted bags, tubs or contractor packs. Separate length variants and protect heads and sharp points. |
|---|---|
| OEM review | Diameter, length mix, countersunk head, drive, coarse thread, point, material, finish and packaging can be reviewed against the timber joint and exposure condition. |
Frequently Asked Questions
| Is the assortment limited to the photographed contents? | No. The gallery records the current photographed configuration. Final component types, sizes, quantities and compartment layout require an approved bill of materials and pack sample. |
|---|---|
| Can screw or bolt sizes be customized? | Compatible self-tapping components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, mating part, substrate, pack format and purchase specification. |
| Can these screws be specified for treated timber? | Provide the timber treatment, exposure condition and coating acceptance criteria for compatibility review. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed component material, service environment and acceptance requirement. |
| Can the organizer and label be customized? | Yes. Approve the length schedule, count, label artwork, barcode and carton marks before production. |
| What is required for quotation? | Send the component bill of materials, drawings or samples, substrate or mating parts, compartment layout, label artwork, quantity and acceptance criteria. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
| Quotation request | Send the following product-specific information so JH Fix can review an accurate specification and quotation. |
|---|---|
| RFQ item 1 | Deck board and framing materials |
| RFQ item 2 | Diameter and length schedule |
| RFQ item 3 | Head, drive, thread and point |
| RFQ item 4 | Pilot hole, edge distance and embedment |
| RFQ item 5 | Coating and exposure requirements |
| RFQ item 6 | Pack count, label and carton specification |
| Contact | Get a Quote | Send Drawing / Sample | WhatsApp |
| Datasheet | Available after specification confirmation. |
Yellow-toned countersunk coarse-thread pointed screws shown in several lengths for deck and timber-joint review. Final sizes, coating and packaging remain order variables.
