Silver Furniture Cam Lock Connector — Silver circular furniture cam lock bodies shown as individual replacement connector components. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Silver circular furniture cam lock bodies shown as individual replacement connector components. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Silver Furniture Cam Lock Connector |
|---|---|
| Current Product Configuration | Silver circular furniture cam lock bodies shown as individual replacement connector components. |
| Primary Form | Round eccentric cam body with a screwdriver recess for engagement with a compatible connector dowel. |
| Head / Interface | Confirm outside profile, height, drive recess, internal capture form, orientation and matching dowel head. |
| Thread / Mating Part | Confirm any compatible screw or dowel thread separately from the cam body, together with panel hole and installed projection. |
| Current Appearance | Silver metallic appearance shown; confirm material, finish, corrosion requirement and visual acceptance. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel thickness, face-bore diameter and depth, edge drilling, centerline, insertion orientation and closing travel. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Replacement bags or matched connector kits can be reviewed with approved component ratios, labels and compartment layout. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Flat-pack furniture joints | Align the face bore, edge hole and dowel projection to the confirmed panel system. |
|---|---|
| Cabinet connector replacement | Compare the cam, mating dowel and drilled panel before approving compatibility. |
| Production panel assembly | Control drilling position, cam orientation and closing trial on representative panels. |
| Retail or OEM hardware kits | Verify matched counts, labels, instructions and compartment separation. |
Buyer Guide
| Can a cam with the same diameter always replace the original? | No. Height, eccentric path, dowel-head interface, orientation and panel drilling must also match. |
|---|---|
| How should the panel holes be specified? | Provide diameter, depth, centerline, edge offset, panel thickness and drilling tolerance. |
| Can joint strength be stated from the photo? | No. Define the full joint, panel material, mating components and test method. |
| What is needed for a replacement review? | Send the existing cam and dowel, panel-hole measurements and installation photos or samples. |
Quality Control
| Cam profile | Inspect outside diameter, height, recess, internal capture form and orientation. |
|---|---|
| Panel trial | Verify insertion, seating, rotation and clearance in the approved bore. |
| Dowel engagement | Check capture, closing travel, joint pull-up and release with the actual mating part. |
| Packaging control | Verify component ratio, count, instruction, label and compartment separation. |
Packaging & Customization
| Packaging Format | Replacement bags or matched connector kits can be reviewed with approved component ratios, labels and compartment layout. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Can a cam with the same diameter always replace the original? | No. Height, eccentric path, dowel-head interface, orientation and panel drilling must also match. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Replacement bags or matched connector kits can be reviewed with approved component ratios, labels and compartment layout. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Cam and dowel drawings or samples |
|---|---|
| RFQ 2 | Cam profile, recess and orientation details |
| RFQ 3 | Panel material, thickness and face-bore dimensions |
| RFQ 4 | Edge drilling, centerline and dowel projection |
| RFQ 5 | Material, finish and required joint test |
| RFQ 6 | Kit count, component ratio, label and packaging |
MOQ: 10,000 pcs per confirmed specification
