Product Overview
| metric bolt, nut and washer assortment kit | A divided organizer showing yellow-zinc-toned metric hex bolts with matching nuts and washers. Final thread schedule, material class, coating and counts require confirmation. |
|---|---|
| Buying context 1 | Each bolt must be paired with the correct nut thread and washer dimensions in the approved bill of materials. |
| Buying context 2 | No certification, property class or performance claim is transferred from legacy graphics without confirmed documentation. |
| Procurement note | Bolt diameter, pitch and length schedule; Hex-head dimensions and wrench size; Matching nut and washer specifications; Material class, coating and documentation; Count and compartment map; Organizer, label and carton artwork. |
Specifications & Custom Capability
Use the photographed configuration to identify the product and packaging form. Final components, quantities, dimensions, materials, finishes and packaging are confirmed against the approved bill of materials, drawing, sample or purchase specification.
Current Product Configuration
| Product Type | Metric bolt, nut and washer assortment kit |
|---|---|
| Gallery Configuration | Metric hex bolts, matching nuts and washers in a divided case shown |
| Primary Fastener | External-thread hex bolts in several photographed diameters and lengths |
| Head & Drive | External hex head shown; confirm across-flats dimension and tool access |
| Thread / Point | Machine thread with blunt end shown; confirm diameter, pitch, tolerance and length |
| Included Mating Parts | Matching hex nuts and washers shown; confirm thread and washer pairing |
| Packaging Format | Handled divided organizer case shown |
| Current Appearance | Yellow-zinc-toned metallic appearance; confirm material and coating specification |
| Material | Confirm according to drawing, sample or purchase specification. |
| Sizes & Quantities | Confirm the complete bill of materials and count per compartment; photographed labels do not replace an approved packing list. |
| Application Base | Specify clamped stack, hole clearance, mating nut, washer position and service environment |
| Installation | Confirm wrench size, tightening method, engagement, protrusion and acceptance criteria |
| Kit BOM Control | Assign an approved part number, size, quantity and compartment to every included component. |
Custom Manufacturing & Order Review
| Customization Scope | Bolt diameter, pitch and length, hex head, nut, washer, material, finish, counts, organizer layout and label can be reviewed against the joint drawing and BOM. |
|---|---|
| Manufacturing Capability | Review bolt thread and length, head, nut, washer, quantities, compartments and label as one controlled kit BOM |
| Made-to-Drawing | Available for review with component drawings, assembly section and compartment or packaging layout. |
| Made-to-Sample | Available for comparison with representative fasteners, mating parts, substrate and approved pack sample. |
| Custom Specification Review | Confirm joint drawing, thread pairing, material class, coating, tightening requirement, kit schedule and pack layout before quotation |
| Packaging & Private Label | Organizer layout, insert, barcode, label and cartons can be reviewed after every bolt, nut and washer line is approved |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative kit with the proposed component bill of materials, organizer and label for approval. |
| Custom Thread Range | Machine-thread components from M1 to M12 can be reviewed where compatible with the confirmed bolt or screw type, mating thread and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed for compatible screw or bolt components according to subtype, diameter, head geometry, pack format and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed component material, service environment and acceptance requirement. |
Applications
| Workshop maintenance kits | Organize matched bolts, nuts and washers under approved item codes. |
|---|---|
| Equipment assembly packs | Confirm clamped stack, hole clearance, engagement and tightening method. |
| OEM service assortments | Match replacement hardware to the equipment drawing and controlled BOM. |
| Private-label fastener cases | Approve organizer layout, insert, barcode and carton with the full thread schedule. |
Buyer Guide
| How are bolts and nuts paired? | Specify the same thread diameter, pitch and tolerance and verify fit with approved samples. |
|---|---|
| How should bolt length be selected? | Use the clamped stack, washer thickness, required nut engagement and protrusion allowance. |
| Are material class and coating confirmed by the photos? | No. State material, property class, coating and acceptance documentation in the purchase specification. |
| How is the organizer controlled? | Assign every bolt, nut and washer a part number, quantity and compartment location. |
Quality Control
| Thread pairing | Check bolt and nut diameter, pitch, tolerance, lead and hand-start fit. |
|---|---|
| Bolt and washer geometry | Inspect length, head dimensions, shank, washer inside and outside dimensions and flatness. |
| Assembly trial | Verify clearance, washer seating, nut engagement, protrusion and tightening method. |
| Pack audit | Count each compartment and verify the organizer, insert, label and carton marks. |
| Acceptance basis | Relevant testing can be reviewed according to the buyer's specified substrate, mating parts, installation method and acceptance criteria. |
Packaging & Customization
| Packaging plan | Use a divided organizer with matched bolt, nut and washer compartments, approved insert artwork and protective master cartons. Prevent mixed threads and migrating parts. |
|---|---|
| OEM review | Bolt diameter, pitch and length, hex head, nut, washer, material, finish, counts, organizer layout and label can be reviewed against the joint drawing and BOM. |
Frequently Asked Questions
| Is the assortment limited to the photographed contents? | No. The gallery records the current photographed configuration. Final component types, sizes, quantities and compartment layout require an approved bill of materials and pack sample. |
|---|---|
| Can screw or bolt sizes be customized? | Compatible machine-thread components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, mating part, substrate, pack format and purchase specification. |
| Are the photographed property class and certifications included? | No. Provide the required material class, test method and documentation; legacy graphics are not treated as confirmed evidence. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed component material, service environment and acceptance requirement. |
| Can the organizer and label be customized? | Yes. Submit the thread schedule, compartment map, insert copy, barcode and artwork after the matched hardware BOM is approved. |
| What is required for quotation? | Send the component bill of materials, drawings or samples, substrate or mating parts, compartment layout, label artwork, quantity and acceptance criteria. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
| Quotation request | Send the following product-specific information so JH Fix can review an accurate specification and quotation. |
|---|---|
| RFQ item 1 | Bolt diameter, pitch and length schedule |
| RFQ item 2 | Hex-head dimensions and wrench size |
| RFQ item 3 | Matching nut and washer specifications |
| RFQ item 4 | Material class, coating and documentation |
| RFQ item 5 | Count and compartment map |
| RFQ item 6 | Organizer, label and carton artwork |
| Contact | Get a Quote | Send Drawing / Sample | WhatsApp |
| Datasheet | Available after specification confirmation. |
A divided organizer showing yellow-zinc-toned metric hex bolts with matching nuts and washers. Final thread schedule, material class, coating and counts require confirmation.
