Blister-Packed Countersunk Self-Tapping Screw Set — Bright silver-colored pointed screws with countersunk heads and coarse external threads displayed together in a clear hanging blister pack. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Bright silver-colored pointed screws with countersunk heads and coarse external threads displayed together in a clear hanging blister pack. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Blister-Packed Countersunk Self-Tapping Screw Set |
|---|---|
| Current Product Configuration | Bright silver-colored pointed screws with countersunk heads and coarse external threads displayed together in a clear hanging blister pack. |
| Primary Form | Pointed countersunk screw configuration supplied as a controlled retail or sample blister pack. |
| Head / Interface | Confirm head diameter and angle, recess type and depth, under-head transition, seating face and driver access. |
| Thread / Mating Part | Confirm diameter, pitch or thread form, threaded length, point geometry, pilot-hole requirement, substrate and engagement. |
| Current Appearance | Bright silver-colored screws are shown; confirm base material, finish process, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm substrate, pilot or clearance hole, fixture thickness, seating requirement, driver, tightening method and buyer test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Retail screw blister packs | Control the approved screw specification, count, card and cavity layout. |
|---|---|
| Furniture and fixture assembly packs | Match the screw to the substrate, hole and seating condition. |
| Maintenance sample programs | Identify the exact screw and installation method on the label. |
| OEM mounting packs | Supply the confirmed fastener with the associated assembly instructions. |
Buyer Guide
| Does the photographed blister define the order? | No. Confirm the screw specification, quantity, cavity, card and artwork separately. |
|---|---|
| What head information is required? | Specify head diameter, angle, recess, depth and seating requirement. |
| How is the thread and point selected? | Use the substrate, pilot hole, engagement, fixture and approved installation trial. |
| Can the visible finish define the coating? | No. Confirm material, process, corrosion requirement and approved sample. |
Quality Control
| Head and drive | Inspect head profile, recess, edges, seating face and visible surface. |
|---|---|
| Thread and point | Check form, pitch, length, point geometry and damage. |
| Installation trial | Verify driving, engagement, seating and buyer-specified test in the approved substrate. |
| Blister and count audit | Confirm screw identity, count, cavity, seal, card, label and carton. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| Does the photographed blister define the order? | No. Confirm the screw specification, quantity, cavity, card and artwork separately. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Head, drive, thread, point and dimensions |
| RFQ 3 | Substrate, hole, fixture and engagement |
| RFQ 4 | Material, finish and corrosion requirement |
| RFQ 5 | Quantity per blister and order quantity |
| RFQ 6 | Cavity, card, artwork and cartons |
MOQ: 10,000 pcs per confirmed specification
