Blue Countersunk Internal-Hex Machine Screw — Blue countersunk internal-hex machine screw forms shown from several head, thread and end orientations. Final thread, length, head, material, finish, mating part, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Blue countersunk internal-hex machine screw forms shown from several head, thread and end orientations. |
|---|---|
| Purchasing Position | Custom machine-thread component requiring geometry, mating-thread and assembly confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Blue Countersunk Internal-Hex Machine Screw |
|---|---|
| Current Product Configuration | Blue countersunk internal-hex machine screw forms shown from several head, thread and end orientations. |
| Primary Form | Flat countersunk head with an internal-hex drive and short machine-thread body shown. |
| Head / Interface | Confirm head diameter, countersink angle, recess size, seating depth and tool access. |
| Thread / Mating Part | Machine thread shown; confirm diameter, pitch, length, tolerance, lead and end geometry. |
| Current Appearance | Blue surface appearance shown; confirm base material, finish system, shade and service condition. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm mating tapped hole or nut, countersunk seat, joint stack, engagement and tightening method. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw or connector drawings, joint section and mating-part specification. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, connectors, mating parts and approved finish samples. |
| Custom Thread Range | Machine-thread components from M1 to M12 can be reviewed where compatible with the confirmed subtype, mating thread, head geometry and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed where compatible with the confirmed diameter, head geometry, engagement, manufacturing route and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Protective separated bags, trays or private-label packs can be reviewed to prevent visible head damage and mixed part numbers. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample made to the proposed geometry, thread, finish and packaging specification. |
Applications
| Flush-mounted hardware | Match countersink angle, head diameter and seating depth to the receiving part. |
|---|---|
| Colored fixture assemblies | Approve finish shade and visible-head acceptance against a representative sample. |
| Small equipment panels | Confirm thread engagement, backside clearance and tightening method. |
| OEM screw packs | Control diameter, pitch, length, finish, count, label and package position by item code. |
Buyer Guide
| What controls flush seating? | Head angle, head diameter, countersink geometry, depth and surface condition must be reviewed together. |
|---|---|
| Is the blue appearance a material specification? | No. Confirm material and finish system separately. |
| How should thread length be selected? | Use the joint stack, mating-thread depth, required engagement and backside clearance. |
| Can the visible head be protected in packaging? | Yes. Review separators, trays or protective bags after the approved finish sample is set. |
Quality Control
| Countersunk head | Inspect angle, diameter, height, socket geometry and seating surface. |
|---|---|
| Thread geometry | Check diameter, pitch, length, tolerance, lead and end form. |
| Finish appearance | Compare color, coverage and visible defects with the approved sample. |
| Assembly trial | Verify hand start, engagement, flush seating, tool fit, tightening and removal. |
Packaging & Customization
| Packaging Format | Protective separated bags, trays or private-label packs can be reviewed to prevent visible head damage and mixed part numbers. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final geometry, thread, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can thread and length be customized? | Machine-thread components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, head geometry, mating thread, engagement, manufacturing route and purchase specification. |
| What controls flush seating? | Head angle, head diameter, countersink geometry, depth and surface condition must be reviewed together. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Protective separated bags, trays or private-label packs can be reviewed to prevent visible head damage and mixed part numbers. |
| What is required for quotation? | Send the screw or connector drawing or sample, mating part, joint stack, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Thread diameter, pitch, tolerance and length |
| RFQ 3 | Head diameter, countersink angle and socket size |
| RFQ 4 | Mating thread, countersunk seat and joint stack |
| RFQ 5 | Material, finish system, color and environment |
| RFQ 6 | Quantity, visible-head protection, label and cartons |
MOQ: 10,000 pcs per confirmed specification
