Furniture Cam Connector with Interchangeable Sleeves — Furniture connector components shown as a metal cam dowel, eccentric cam and black or blue polymer sleeves, including an installed cabinet example. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Furniture connector components shown as a metal cam dowel, eccentric cam and black or blue polymer sleeves, including an installed cabinet example. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Furniture Cam Connector with Interchangeable Sleeves |
|---|---|
| Current Product Configuration | Furniture connector components shown as a metal cam dowel, eccentric cam and black or blue polymer sleeves, including an installed cabinet example. |
| Primary Form | Multi-component knock-down furniture connection using a cam, dowel and selected sleeve or panel interface. |
| Head / Interface | Confirm cam diameter and depth, dowel head and shank, shoulder positions, sleeve outside profile and bore, installed projection and clearances. |
| Thread / Mating Part | Confirm every internal or external thread, dowel engagement and selected sleeve compatibility using the production components. |
| Current Appearance | Bright metal parts with black and blue sleeves are shown; confirm metal, finish, sleeve resin, color and approved samples. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm both panel materials and thicknesses, hole diameters, depths and offsets, drilling orientation, cam direction, tightening access and buyer test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Knock-down cabinet joints | Match cam, dowel, sleeve and panel drilling as one approved system. |
|---|---|
| Wardrobe and storage furniture | Confirm access, cam orientation and visible cap or sleeve color. |
| Replacement connector programs | Compare all components, holes and installed projection. |
| OEM furniture hardware bags | Control component ratio, color variant, labels and assembly instructions. |
Buyer Guide
| Which sleeve color or form should be ordered? | Select the sleeve by approved sample and confirm its panel hole and mating dowel. |
|---|---|
| How is the cam and dowel pair approved? | Use the actual panels, hole layout, engagement and tightening trial. |
| Can the photographed dimensions define production? | No. Provide component drawings or approved samples and the joint section. |
| What must be included in the BOM? | List every cam, dowel, sleeve, cap, quantity, color and packaging position. |
Quality Control
| Cam and dowel | Inspect profiles, threads or engagement features, head, shank and surface. |
|---|---|
| Polymer sleeve | Check outside profile, bore, dimensions, molding, color and retention. |
| Panel-joint trial | Verify drilling, insertion, cam capture, tightening, alignment and buyer test. |
| BOM and pack audit | Confirm components, ratio, color, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Which sleeve color or form should be ordered? | Select the sleeve by approved sample and confirm its panel hole and mating dowel. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Complete connector BOM |
|---|---|
| RFQ 2 | Component drawings or approved samples |
| RFQ 3 | Panel materials, holes, offsets and joint section |
| RFQ 4 | Assembly sequence and tightening method |
| RFQ 5 | Materials, finishes, sleeve resin and color |
| RFQ 6 | Set quantity, labels, instructions and packaging |
MOQ: 10,000 pcs per confirmed specification
