Purple Furniture Cam Lock and Connector Dowel Set — Purple round eccentric cam lock bodies shown with bright metallic furniture connector dowels or screws. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Purple round eccentric cam lock bodies shown with bright metallic furniture connector dowels or screws. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Purple Furniture Cam Lock and Connector Dowel Set |
|---|---|
| Current Product Configuration | Purple round eccentric cam lock bodies shown with bright metallic furniture connector dowels or screws. |
| Primary Form | Two-part furniture connector set combining a colored eccentric cam with a compatible headed connector dowel. |
| Head / Interface | Confirm cam profile, recess and capture path together with dowel head, shank, shoulder and installed projection. |
| Thread / Mating Part | Connector dowel or screw thread shown; confirm form, diameter, pitch, length, mating panel or insert and engagement. |
| Current Appearance | Purple cam appearance and bright metallic connector appearance shown; confirm materials, finishes and acceptance samples. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel thickness, face bore, edge hole, centerline, dowel projection, cam orientation, tightening and release. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Matched cam-and-dowel kits, compartment boxes or private-label packs can be reviewed with controlled component ratios. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Colored knock-down furniture joints | Coordinate panel drilling, dowel projection, cam orientation and visible finish. |
|---|---|
| Cabinet and wardrobe connector sets | Confirm mating components and complete the assembly trial in representative panels. |
| Decorative furniture hardware | Approve the purple cam surface and visible recess against a physical sample. |
| OEM connector kits | Control matched component counts, item codes, instructions, labels and compartments. |
Buyer Guide
| How are cam and dowel compatibility checked? | Review dowel-head geometry, installed projection, cam capture path, closing travel and panel-hole centerline. |
|---|---|
| Does purple color identify the material? | No. Confirm cam material and finish system separately. |
| Can joint strength be stated from the components alone? | No. Define the complete panel joint and required test method. |
| What panel information is needed? | Provide material, thickness, face-bore and edge-hole dimensions, centerline and tolerance. |
Quality Control
| Cam profile | Inspect body dimensions, recess, eccentric capture geometry and orientation. |
|---|---|
| Dowel geometry | Check head, neck, shank, shoulder, thread and installed projection. |
| Panel joint trial | Verify drilling fit, capture, closing travel, joint pull-up, release and panel condition. |
| Kit and finish audit | Check approved appearance, matched counts, labels and compartment separation. |
Packaging & Customization
| Packaging Format | Matched cam-and-dowel kits, compartment boxes or private-label packs can be reviewed with controlled component ratios. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| How are cam and dowel compatibility checked? | Review dowel-head geometry, installed projection, cam capture path, closing travel and panel-hole centerline. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Matched cam-and-dowel kits, compartment boxes or private-label packs can be reviewed with controlled component ratios. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Cam and connector dowel drawings or samples |
|---|---|
| RFQ 2 | Cam profile and dowel-head engagement |
| RFQ 3 | Dowel thread, length and installed projection |
| RFQ 4 | Panel material, thickness, holes and centerline |
| RFQ 5 | Cam and dowel materials, finishes and samples |
| RFQ 6 | Kit quantity, component ratio, instruction and packaging |
MOQ: 10,000 pcs per confirmed specification
