Product Overview
| coarse-thread deck screw assortment case | A clear organizer case showing yellow-toned countersunk coarse-thread pointed deck screws in several lengths. Final screw schedule, coating and quantities require confirmation. |
|---|---|
| Buying context 1 | The case separates length groups for controlled selection at installation. |
| Buying context 2 | The pictured size mix is a photographed configuration and does not set the final order schedule. |
| Procurement note | Deck board and framing materials; Diameter and length schedule; Head, drive, thread and point; Pilot hole, embedment and seating; Coating and exposure requirements; Compartment counts, insert and carton artwork. |
Specifications & Custom Capability
Use the photographed configuration to identify the product and packaging form. Final components, quantities, dimensions, materials, finishes and packaging are confirmed against the approved bill of materials, drawing, sample or purchase specification.
Current Product Configuration
| Product Type | Coarse-thread deck screw assortment case |
|---|---|
| Gallery Configuration | Yellow-toned countersunk pointed screws in mixed lengths and a clear case shown |
| Primary Fastener | Countersunk coarse-thread deck or timber screws |
| Head & Drive | Countersunk head; confirm internal drive from approved sample |
| Thread / Point | Coarse thread and sharp point shown |
| Included Mating Parts | No separate mating hardware shown; specify timber joint |
| Packaging Format | Clear divided organizer case shown |
| Current Appearance | Yellow-toned metallic appearance; confirm coating system |
| Material | Confirm according to drawing, sample or purchase specification. |
| Sizes & Quantities | Confirm the complete bill of materials and count per compartment; photographed labels do not replace an approved packing list. |
| Application Base | Specify deck board, timber framing, edge distance, exposure and joint geometry |
| Installation | Confirm driver, pilot hole, embedment, head seating and timber-specific trial method |
| Kit BOM Control | Assign an approved part number, size, quantity and compartment to every included component. |
Custom Manufacturing & Order Review
| Customization Scope | Diameter and length schedule, head, drive, thread, point, finish, quantities, compartment map, label and carton can be reviewed against the timber application. |
|---|---|
| Manufacturing Capability | Review diameter and length schedule, head, drive, thread, point, coating, case layout and counts as one assortment |
| Made-to-Drawing | Available for review with component drawings, assembly section and compartment or packaging layout. |
| Made-to-Sample | Available for comparison with representative fasteners, mating parts, substrate and approved pack sample. |
| Custom Specification Review | Confirm timber, exposure, joint stack, screw schedule, installation criteria and organizer layout before quotation |
| Packaging & Private Label | Case color, compartment map, insert, barcode and outer carton can be reviewed after the screw schedule is approved |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative kit with the proposed component bill of materials, organizer and label for approval. |
| Custom Thread Range | Self-tapping components from M1 to M12 can be reviewed where compatible with the confirmed screw subtype, substrate and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed for compatible screw or bolt components according to subtype, diameter, head geometry, pack format and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed component material, service environment and acceptance requirement. |
Applications
| Deck board installation packs | Match screw length to board thickness, framing and required embedment. |
|---|---|
| Fence and exterior timber kits | Review timber treatment, edge distance, coating and pilot-hole condition. |
| Contractor organizer cases | Keep each diameter and length in an identified compartment. |
| Private-label retail assortments | Approve the screw schedule, insert, barcode and carton with the full BOM. |
Buyer Guide
| How should the compartments be assigned? | Give every screw diameter and length an item code, quantity and approved location. |
|---|---|
| Can the pictured size mix be changed? | Yes. Build the final schedule from board thickness, embedment, framing and pack count. |
| Is predrilling required? | Confirm from timber species, edge distance, screw geometry and representative installation trials. |
| Does the yellow color prove outdoor performance? | No. Specify the coating system, exposure condition and acceptance criteria. |
Quality Control
| Screw geometry | Inspect diameter, length, head, drive, thread, point and straightness. |
|---|---|
| Timber installation | Check drive fit, insertion, splitting, seating, clamp-up and removal. |
| Finish review | Verify the approved coating system, appearance and acceptance criteria. |
| Pack audit | Count each compartment and verify the insert, case closure, label and carton marks. |
| Acceptance basis | Relevant testing can be reviewed according to the buyer's specified substrate, mating parts, installation method and acceptance criteria. |
Packaging & Customization
| Packaging plan | Use a clear divided organizer with controlled size groups, approved insert artwork and protective master cartons. Prevent screw migration and mixed lengths. |
|---|---|
| OEM review | Diameter and length schedule, head, drive, thread, point, finish, quantities, compartment map, label and carton can be reviewed against the timber application. |
Frequently Asked Questions
| Is the assortment limited to the photographed contents? | No. The gallery records the current photographed configuration. Final component types, sizes, quantities and compartment layout require an approved bill of materials and pack sample. |
|---|---|
| Can screw or bolt sizes be customized? | Compatible self-tapping components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, mating part, substrate, pack format and purchase specification. |
| Can the kit be used for treated timber? | Provide the timber treatment, exposure condition and coating requirement for compatibility review. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed component material, service environment and acceptance requirement. |
| Can the organizer and label be customized? | Yes. Approve the screw schedule, compartment map, count statement, barcode and artwork before production. |
| What is required for quotation? | Send the component bill of materials, drawings or samples, substrate or mating parts, compartment layout, label artwork, quantity and acceptance criteria. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
| Quotation request | Send the following product-specific information so JH Fix can review an accurate specification and quotation. |
|---|---|
| RFQ item 1 | Deck board and framing materials |
| RFQ item 2 | Diameter and length schedule |
| RFQ item 3 | Head, drive, thread and point |
| RFQ item 4 | Pilot hole, embedment and seating |
| RFQ item 5 | Coating and exposure requirements |
| RFQ item 6 | Compartment counts, insert and carton artwork |
| Contact | Get a Quote | Send Drawing / Sample | WhatsApp |
| Datasheet | Available after specification confirmation. |
A clear organizer case showing yellow-toned countersunk coarse-thread pointed deck screws in several lengths. Final screw schedule, coating and quantities require confirmation.
