Square-Top Furniture Cam Lock Samples — Square-top eccentric cam lock samples shown in metallic and grey polymer-looking configurations. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Square-top eccentric cam lock samples shown in metallic and grey polymer-looking configurations. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Square-Top Furniture Cam Lock Samples |
|---|---|
| Current Product Configuration | Square-top eccentric cam lock samples shown in metallic and grey polymer-looking configurations. |
| Primary Form | Compact cam body with a square top profile, driver recess and eccentric capture cavity for a compatible connector dowel. |
| Head / Interface | Confirm top width and corner radius, body diameter and height, drive recess, capture path, orientation and mating dowel head. |
| Thread / Mating Part | The cam body is not selected by thread alone; confirm the compatible dowel or screw and its installed projection. |
| Current Appearance | Metallic and grey sample appearances shown; confirm each material, finish or color system and the approved visual sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel thickness, face-bore shape and depth, edge hole, centerline, insertion orientation, dowel position and closing direction. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Separated bags, matched connector kits or private-label packs can be reviewed with approved cam type and dowel ratio. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Square-recess furniture connector systems | Match the top profile, body and panel recess to the approved machining drawing. |
|---|---|
| Knock-down cabinet panels | Coordinate face bore, edge hole, dowel projection and cam orientation. |
| Replacement connector programs | Compare the original cam, dowel and drilled panel before approval. |
| Mixed material sample sets | Separate metal and polymer configurations under controlled item codes and labels. |
Buyer Guide
| Does a similar square top guarantee interchangeability? | No. Body profile, capture path, recess, dowel head and panel machining must also match. |
|---|---|
| Can metal and polymer versions use the same panel hole? | Only after geometry, retention and assembly trials confirm compatibility. |
| How is the mating dowel selected? | Confirm its head, neck, shank or thread, installed projection and engagement path. |
| Can joint performance be inferred from appearance? | No. Define the complete panel joint and test method. |
Quality Control
| Top and body profile | Inspect width, corners, body dimensions, recess and eccentric cavity. |
|---|---|
| Panel fit | Verify insertion, seating, orientation and rotation in a representative bore. |
| Dowel engagement | Check capture, closing travel, joint pull-up and release. |
| Pack verification | Confirm material version, matched count, item code, label and compartment. |
Packaging & Customization
| Packaging Format | Separated bags, matched connector kits or private-label packs can be reviewed with approved cam type and dowel ratio. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Does a similar square top guarantee interchangeability? | No. Body profile, capture path, recess, dowel head and panel machining must also match. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Separated bags, matched connector kits or private-label packs can be reviewed with approved cam type and dowel ratio. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Cam drawings or approved samples |
|---|---|
| RFQ 2 | Top profile, body, recess and orientation |
| RFQ 3 | Panel thickness and face-bore specification |
| RFQ 4 | Edge hole, centerline and mating dowel geometry |
| RFQ 5 | Material, finish or color and joint test |
| RFQ 6 | Quantity, version ratio, label and packaging |
MOQ: 10,000 pcs per confirmed specification
