Plastic-Sleeved Quick-Connect Furniture Dowel — Quick-connect dowels shown with long silver-colored metal shanks, rounded capture heads and green, blue or dark polymer sleeves with external threads. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Quick-connect dowels shown with long silver-colored metal shanks, rounded capture heads and green, blue or dark polymer sleeves with external threads. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Plastic-Sleeved Quick-Connect Furniture Dowel |
|---|---|
| Current Product Configuration | Quick-connect dowels shown with long silver-colored metal shanks, rounded capture heads and green, blue or dark polymer sleeves with external threads. |
| Primary Form | Furniture connector dowel intended to install through a polymer sleeve in a prepared panel and engage a confirmed cam or capture fitting. |
| Head / Interface | Confirm metal head and neck, shank length, sleeve outside thread and flange, internal retention, panel entry, projection and mating-cam geometry. |
| Thread / Mating Part | Confirm sleeve thread form and diameter, metal shank retention, pilot hole, panel engagement, projection and compatibility with the approved capture fitting. |
| Current Appearance | Silver-colored metal with green, blue and dark polymer variants is shown; confirm resin, color, metal material, finish and approved samples. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel material and thickness, pilot hole, sleeve installation, projection, mating cam, center distances, insertion method and buyer-specified joint test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Quick-assembly cabinet joints | Match sleeve installation and projection to the approved cam fitting. |
|---|---|
| Knock-down furniture panels | Confirm pilot hole, edge distance and repeated assembly needs. |
| Replacement connector dowels | Compare head, shank, sleeve and cam interface with approved samples. |
| Color-coded hardware packs | Control sleeve color, dowel variant, count, labels and protection. |
Buyer Guide
| Which panel-hole data are required? | Provide panel material, thickness, pilot-hole diameter and depth, edge distance and tolerances. |
|---|---|
| How is the mating cam selected? | Confirm capture profile, center distance, projection and tightening method with matched samples. |
| Does sleeve color define the resin? | No. Confirm resin, color code, installation behavior and service condition. |
| Can the source dimension charts define the order? | No. Submit an approved drawing or sample for every variant. |
Quality Control
| Metal dowel geometry | Inspect head, neck, shank, straightness, end and visible defects. |
|---|---|
| Polymer sleeve | Check thread form, flange, color, retention, surface and molding condition. |
| Panel and cam trial | Verify pilot-hole fit, sleeve installation, projection, capture and buyer-specified test. |
| Pack audit | Confirm variant and color, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Which panel-hole data are required? | Provide panel material, thickness, pilot-hole diameter and depth, edge distance and tolerances. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Dowel and sleeve drawing or samples |
|---|---|
| RFQ 2 | Panel material, thickness and pilot hole |
| RFQ 3 | Mating cam and center distance |
| RFQ 4 | Projection, installation and assembly sequence |
| RFQ 5 | Metal, finish, resin, color and test requirement |
| RFQ 6 | Quantity, variants, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
