Yellow Nylon Expansion Plug and Screw Set — Yellow ribbed expansion plugs shown with bright cross-drive pointed screws in several plug lengths and paired configurations. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Yellow ribbed expansion plugs shown with bright cross-drive pointed screws in several plug lengths and paired configurations. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Yellow Nylon Expansion Plug and Screw Set |
|---|---|
| Current Product Configuration | Yellow ribbed expansion plugs shown with bright cross-drive pointed screws in several plug lengths and paired configurations. |
| Primary Form | Two-part fixing set using a screw to expand a slotted ribbed plug inside a prepared base-material hole. |
| Head / Interface | Confirm plug outside profile, collar, ribs and expansion zones with screw head, drive, shank, thread and fixture hole. |
| Thread / Mating Part | Pointed coarse-thread screws shown; confirm diameter, profile, length, plug bore, required engagement and fixture stack. |
| Current Appearance | Yellow polymer plugs with bright metallic screws shown; confirm plug resin and color, screw material and finish. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm concrete, masonry, block or approved base material, drilled-hole diameter and depth, cleaning, fixture and installation method. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Matched plug-and-screw sets or size-separated assortments can be reviewed with controlled pair counts, labels and instructions. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Light fixture attachment | Match plug, screw and hole to the actual base material and fixture. |
|---|---|
| Wall-mounted hardware | Confirm load direction, fixture hole, embedment and installation method. |
| Masonry and block fixing | Validate drilling, hole cleaning and expansion in the specified substrate. |
| OEM fixing assortments | Control every plug-screw pairing, size group, count and compartment. |
Buyer Guide
| How are the plug and screw paired? | Confirm plug bore and expansion behavior with screw diameter, thread, length and fixture stack. |
|---|---|
| Can one plug be used in every wall material? | No. Base material, hole quality and required performance must be evaluated. |
| How is the drilled hole selected? | Define diameter, depth, cleaning method and installation trial for the approved base material. |
| Can load capacity be inferred from the photographs? | No. State the complete fixing system and required test method. |
Quality Control
| Expansion plug | Inspect outside profile, ribs, slots, collar, bore and molding condition. |
|---|---|
| Mating screw | Check head, drive, shank, thread, point, straightness and finish. |
| Base-material trial | Verify drilling, insertion, expansion, fixture seating and the specified load test. |
| Pair and pack audit | Confirm plug-screw pairing, size groups, counts, label, instructions and compartments. |
Packaging & Customization
| Packaging Format | Matched plug-and-screw sets or size-separated assortments can be reviewed with controlled pair counts, labels and instructions. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| How are the plug and screw paired? | Confirm plug bore and expansion behavior with screw diameter, thread, length and fixture stack. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Matched plug-and-screw sets or size-separated assortments can be reviewed with controlled pair counts, labels and instructions. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Plug and screw drawings or approved samples |
|---|---|
| RFQ 2 | Plug profile, bore and expansion geometry |
| RFQ 3 | Screw head, drive, thread, point and length |
| RFQ 4 | Base material, drilled hole, fixture and embedment |
| RFQ 5 | Plug resin, screw finish and test method |
| RFQ 6 | Pair quantities, size groups, label and packaging |
MOQ: 10,000 pcs per confirmed specification
