Cross-Drive Low Pan Head Machine Screw — Bright silver-colored short machine screws shown with broad low pan heads, cross recesses, full threads and blunt ends. Final thread, length, head, material, finish, mating part, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Bright silver-colored short machine screws shown with broad low pan heads, cross recesses, full threads and blunt ends. |
|---|---|
| Purchasing Position | Custom machine-thread component requiring geometry, mating-thread and assembly confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Cross-Drive Low Pan Head Machine Screw |
|---|---|
| Current Product Configuration | Bright silver-colored short machine screws shown with broad low pan heads, cross recesses, full threads and blunt ends. |
| Primary Form | Low-profile broad-head machine screw for clamping against a flat bearing surface. |
| Head / Interface | Confirm head diameter and height, crown profile, bearing face, cross-drive form and depth, under-head radius and access. |
| Thread / Mating Part | Confirm machine-thread diameter, pitch, class, threaded length, end condition, mating nut or tapped hole and engagement. |
| Current Appearance | Bright silver-colored finish shown; confirm base material, coating process, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm mating thread, joint stack, clearance hole, bearing surface, driver access, tightening method and buyer criteria. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw or connector drawings, joint section and mating-part specification. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, connectors, mating parts and approved finish samples. |
| Custom Thread Range | Machine-thread components from M1 to M12 can be reviewed where compatible with the confirmed subtype, mating thread, head geometry and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed where compatible with the confirmed diameter, head geometry, engagement, manufacturing route and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample made to the proposed geometry, thread, finish and packaging specification. |
Applications
| Low-profile panel fastening | Confirm head clearance, bearing face and mating thread. |
|---|---|
| Enclosure and appliance assembly | Coordinate short length, joint stack and tool access. |
| Furniture fitting attachment | Review hole, mating insert and visible-head requirement. |
| Service and OEM screw packs | Control thread, length, count, label and protection. |
Buyer Guide
| What defines the low pan head? | Specify head diameter, height, crown and bearing-face geometry. |
|---|---|
| Which thread data are needed? | Provide diameter, pitch, class, engagement and the production mating part. |
| Can screw length be inferred from the images? | No. Confirm length, threaded length and tolerances by drawing or sample. |
| Can the silver color identify the finish? | No. Confirm the finish system and corrosion requirement. |
Quality Control
| Head and recess | Inspect diameter, height, crown, bearing face, recess and edges. |
|---|---|
| Thread and end | Check profile, pitch, length, end condition and mating fit. |
| Assembly trial | Verify seating, access, engagement and specified tightening test. |
| Pack audit | Confirm variant identity, count, label and surface protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final geometry, thread, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can thread and length be customized? | Machine-thread components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, head geometry, mating thread, engagement, manufacturing route and purchase specification. |
| What defines the low pan head? | Specify head diameter, height, crown and bearing-face geometry. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw or connector drawing or sample, mating part, joint stack, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Head and drive geometry |
| RFQ 3 | Thread, length and mating part |
| RFQ 4 | Joint stack, hole and tightening method |
| RFQ 5 | Material, finish and corrosion requirement |
| RFQ 6 | Variant quantities, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
