Red Socket Head Cap Machine Screw — Red cylindrical socket head cap machine screw forms shown from several orientations. Final thread, length, head, material, finish, mating part, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Red cylindrical socket head cap machine screw forms shown from several orientations. |
|---|---|
| Purchasing Position | Custom machine-thread component requiring geometry, mating-thread and assembly confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Red Socket Head Cap Machine Screw |
|---|---|
| Current Product Configuration | Red cylindrical socket head cap machine screw forms shown from several orientations. |
| Primary Form | Cylindrical cap head with an internal-hex drive and machine thread shown. |
| Head / Interface | Confirm head diameter and height, socket geometry, tool size and surrounding clearance. |
| Thread / Mating Part | Machine thread shown; confirm diameter, pitch, length, tolerance, thread runout and end geometry. |
| Current Appearance | Red surface appearance shown; confirm material, finish system, shade and service environment. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm mating tapped hole or nut, engagement, joint stack, clearance and tightening method. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw or connector drawings, joint section and mating-part specification. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, connectors, mating parts and approved finish samples. |
| Custom Thread Range | Machine-thread components from M1 to M12 can be reviewed where compatible with the confirmed subtype, mating thread, head geometry and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed where compatible with the confirmed diameter, head geometry, engagement, manufacturing route and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Protective bags, trays or private-label packs can be reviewed with item-level size and color identification. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample made to the proposed geometry, thread, finish and packaging specification. |
Applications
| Colored fixture assemblies | Approve the red finish, head clearance, mating thread and service environment. |
|---|---|
| Machine and equipment joints | Confirm engagement, joint stack, tool access and tightening method. |
| Display and hardware samples | Use controlled item codes for each diameter, length and finish. |
| OEM component packs | Approve count, labels, barcode and protective packaging after the screw drawing is fixed. |
Buyer Guide
| Does red color confirm anodized aluminum? | No. Confirm base material and finish system separately. |
|---|---|
| How is length selected? | Use joint stack, required engagement, thread depth and bottom clearance. |
| What head information is required? | Specify head diameter and height, socket geometry, tool size and clearance. |
| How is color consistency approved? | Use a confirmed finish sample and agreed visual inspection condition. |
Quality Control
| Head and socket | Inspect cap-head dimensions, socket depth, concentricity and tool fit. |
|---|---|
| Thread geometry | Check diameter, pitch, length, tolerance, lead, runout and end form. |
| Finish appearance | Compare red shade, coverage and visible defects with the approved sample. |
| Mating and pack trial | Verify fit, seating, tightening, removal, item identification and count. |
Packaging & Customization
| Packaging Format | Protective bags, trays or private-label packs can be reviewed with item-level size and color identification. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final geometry, thread, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can thread and length be customized? | Machine-thread components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, head geometry, mating thread, engagement, manufacturing route and purchase specification. |
| Does red color confirm anodized aluminum? | No. Confirm base material and finish system separately. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Protective bags, trays or private-label packs can be reviewed with item-level size and color identification. |
| What is required for quotation? | Send the screw or connector drawing or sample, mating part, joint stack, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Thread diameter, pitch, tolerance and length |
| RFQ 3 | Head diameter, height and socket size |
| RFQ 4 | Mating thread, joint stack and tool access |
| RFQ 5 | Material, red finish, shade and environment |
| RFQ 6 | Quantity, protective pack, label and cartons |
MOQ: 10,000 pcs per confirmed specification
