Cam Lock with Plastic-Sleeved Connector Screw — Metal eccentric cam shown with a pointed connector screw carrying a green plastic sleeve around part of the shank. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Metal eccentric cam shown with a pointed connector screw carrying a green plastic sleeve around part of the shank. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Cam Lock with Plastic-Sleeved Connector Screw |
|---|---|
| Current Product Configuration | Metal eccentric cam shown with a pointed connector screw carrying a green plastic sleeve around part of the shank. |
| Primary Form | Two-part furniture connector combining a metal cam with a sleeved, coarse-thread connector screw. |
| Head / Interface | Confirm cam capture cavity, screw head and neck, sleeve outside profile and retention, shank, shoulder and projection. |
| Thread / Mating Part | Pointed coarse thread shown; confirm profile, diameter, length, pilot hole, panel material and engagement. |
| Current Appearance | Bright metallic cam and screw with a green sleeve shown; confirm materials, metal finish, sleeve resin and color. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel thickness, face bore, edge hole, pilot hole, centerline, sleeve position, screw projection, cam orientation and tightening sequence. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Matched cam-and-screw sets or compartment kits can be reviewed with sleeve protection, instructions and controlled ratios. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Panel joints requiring a sleeved connector | Confirm sleeve retention and fit with the actual panel hole. |
|---|---|
| Knock-down cabinet assembly | Coordinate pilot hole, screw projection and cam capture. |
| Replacement eccentric connectors | Compare cam, sleeved screw and drilled panel together. |
| Furniture hardware kits | Protect sleeves and control matched component counts and instructions. |
Buyer Guide
| What does the plastic sleeve do? | Its function must be confirmed for the required retention, spacing, panel fit or installation behavior. |
|---|---|
| How is the screw pilot hole selected? | Use the confirmed thread, panel material, sleeve interface and installation trial. |
| Can the sleeve color define its resin? | No. Confirm resin, color and service condition separately. |
| How is cam engagement checked? | Verify screw-head geometry, installed projection, capture path and closing travel. |
Quality Control
| Cam and screw geometry | Inspect cam cavity, screw head, neck, shank, thread and point. |
|---|---|
| Plastic sleeve | Check dimensions, position, retention, resin appearance and damage. |
| Panel installation | Verify pilot hole, sleeve fit, screw projection, cam capture and release. |
| Set audit | Confirm matched count, sleeve protection, instruction, label and compartments. |
Packaging & Customization
| Packaging Format | Matched cam-and-screw sets or compartment kits can be reviewed with sleeve protection, instructions and controlled ratios. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| What does the plastic sleeve do? | Its function must be confirmed for the required retention, spacing, panel fit or installation behavior. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Matched cam-and-screw sets or compartment kits can be reviewed with sleeve protection, instructions and controlled ratios. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Cam and sleeved screw drawings or samples |
|---|---|
| RFQ 2 | Cam capture and screw-head geometry |
| RFQ 3 | Thread, point, pilot hole and projection |
| RFQ 4 | Sleeve dimensions, material, color and position |
| RFQ 5 | Panel material, holes, finish and joint test |
| RFQ 6 | Set quantity, component ratio and packaging |
MOQ: 10,000 pcs per confirmed specification
