Product Overview
| drywall anchor and screw assortment case | A clear organizer case showing white self-drilling plastic wall anchors paired with bright cross-drive screws. Wall construction, anchor geometry and pack quantities remain subject to confirmation. |
|---|---|
| Buying context 1 | The organizer separates anchors and screws for controlled pairing. Every compartment requires an approved item code and quantity. |
| Buying context 2 | No universal load rating is stated. Installation behavior and acceptance criteria must be confirmed in the specified wall construction. |
| Procurement note | Wall construction and fixture thickness; Anchor geometry and polymer requirement; Screw diameter, length, head and drive; Count and compartment for every component; Installation and acceptance criteria; Label artwork, organizer and carton specification. |
Specifications & Custom Capability
Use the photographed configuration to identify the product and packaging form. Final components, quantities, dimensions, materials, finishes and packaging are confirmed against the approved bill of materials, drawing, sample or purchase specification.
Current Product Configuration
| Product Type | Drywall anchor and screw assortment case |
|---|---|
| Gallery Configuration | White self-drilling plastic anchors, bright screws and a clear compartment case shown |
| Primary Fastener | Bright cross-drive screws shown; confirm diameter, length and head geometry |
| Head & Drive | Cross-drive screw head shown |
| Thread / Point | Screw and self-drilling anchor profiles shown; confirm geometry for the selected wall system |
| Included Mating Parts | White plastic anchors shown; confirm polymer, geometry and screw pairing |
| Packaging Format | Clear divided case with printed insert shown |
| Current Appearance | White anchors and bright metallic screws; confirm material and finish |
| Material | Confirm according to drawing, sample or purchase specification. |
| Sizes & Quantities | Confirm the complete bill of materials and count per compartment; photographed labels do not replace an approved packing list. |
| Application Base | Specify gypsum board, hollow wall or other approved receiving construction |
| Installation | Confirm anchor preparation, driver, screw engagement and wall-specific acceptance method |
| Kit BOM Control | Assign an approved part number, size, quantity and compartment to every included component. |
Custom Manufacturing & Order Review
| Customization Scope | Anchor geometry and polymer, paired screw, counts, organizer color and layout, printed insert, barcode and carton marks can be reviewed against the approved wall system and kit BOM. |
|---|---|
| Manufacturing Capability | Review anchor geometry, paired screw, quantities, compartment layout, insert and outer packaging as one kit specification |
| Made-to-Drawing | Available for review with component drawings, assembly section and compartment or packaging layout. |
| Made-to-Sample | Available for comparison with representative fasteners, mating parts, substrate and approved pack sample. |
| Custom Specification Review | Confirm wall construction, anchor-to-screw pairing, installation method, allowable-use criteria, component counts and packaging before quotation |
| Packaging & Private Label | Organizer color, compartment layout, insert, barcode, carton mark and private-label artwork can be reviewed after the BOM is approved |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative kit with the proposed component bill of materials, organizer and label for approval. |
| Custom Thread Range | Self-tapping components from M1 to M12 can be reviewed where compatible with the confirmed screw subtype, substrate and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed for compatible screw or bolt components according to subtype, diameter, head geometry, pack format and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed component material, service environment and acceptance requirement. |
Applications
| Drywall fixture installation kits | Confirm board construction, fixture thickness, anchor preparation and screw engagement. |
|---|---|
| Maintenance and repair packs | Separate paired anchors and screws so replacements remain traceable. |
| Retail hardware assortments | Approve the insert, compartment layout, barcode and outer carton before production. |
| OEM accessory packs | Match the kit BOM to the supplied fixture and installation instructions. |
Buyer Guide
| How should the anchor and screw be paired? | Specify anchor geometry, screw diameter and length, fixture thickness and required engagement as one approved combination. |
|---|---|
| Can one anchor be used in every wall? | No. Confirm wall construction, cavity, material condition and installation method through representative trials. |
| How should compartment quantities be controlled? | List the item code and count for every compartment and approve a complete sample before packing. |
| Is a load rating included? | No unverified load rating is stated. Provide the buyer test method, wall construction and acceptance criteria for review. |
Quality Control
| Anchor geometry | Inspect polymer condition, drilling or expansion features, flange and screw entry. |
|---|---|
| Screw pairing | Verify screw diameter, length, head, drive and engagement with the approved anchor. |
| Installation trial | Check drilling or insertion, anchor seating, screw engagement and removal in representative wall material. |
| Pack audit | Count every compartment and verify insert, label, case closure and carton identification. |
| Acceptance basis | Relevant testing can be reviewed according to the buyer's specified substrate, mating parts, installation method and acceptance criteria. |
Packaging & Customization
| Packaging plan | Use a divided case with controlled anchor and screw compartments, approved insert artwork and protective master cartons. Prevent mixed sizes and loose parts migrating between compartments. |
|---|---|
| OEM review | Anchor geometry and polymer, paired screw, counts, organizer color and layout, printed insert, barcode and carton marks can be reviewed against the approved wall system and kit BOM. |
Frequently Asked Questions
| Is the assortment limited to the photographed contents? | No. The gallery records the current photographed configuration. Final component types, sizes, quantities and compartment layout require an approved bill of materials and pack sample. |
|---|---|
| Can screw or bolt sizes be customized? | Compatible self-tapping components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, mating part, substrate, pack format and purchase specification. |
| Can a load rating be printed on the package? | Only after the wall construction, test method, installation condition and acceptance criteria are confirmed and supported by approved evidence. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed component material, service environment and acceptance requirement. |
| Can the organizer and label be customized? | Yes. Provide the final organizer layout, insert copy, barcode and artwork after the component bill of materials is approved. |
| What is required for quotation? | Send the component bill of materials, drawings or samples, substrate or mating parts, compartment layout, label artwork, quantity and acceptance criteria. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
| Quotation request | Send the following product-specific information so JH Fix can review an accurate specification and quotation. |
|---|---|
| RFQ item 1 | Wall construction and fixture thickness |
| RFQ item 2 | Anchor geometry and polymer requirement |
| RFQ item 3 | Screw diameter, length, head and drive |
| RFQ item 4 | Count and compartment for every component |
| RFQ item 5 | Installation and acceptance criteria |
| RFQ item 6 | Label artwork, organizer and carton specification |
| Contact | Get a Quote | Send Drawing / Sample | WhatsApp |
| Datasheet | Available after specification confirmation. |
A clear organizer case showing white self-drilling plastic wall anchors paired with bright cross-drive screws. Wall construction, anchor geometry and pack quantities remain subject to confirmation.
