Silver Cross-Drive Countersunk Screw with Blue Patch — Silver cross-drive countersunk machine screw forms shown with a localized blue thread patch. Final thread, length, head, material, finish, mating part, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Silver cross-drive countersunk machine screw forms shown with a localized blue thread patch. |
|---|---|
| Purchasing Position | Custom machine-thread component requiring geometry, mating-thread and assembly confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Silver Cross-Drive Countersunk Screw with Blue Patch |
|---|---|
| Current Product Configuration | Silver cross-drive countersunk machine screw forms shown with a localized blue thread patch. |
| Primary Form | Flat countersunk head with a cross recess, short machine thread and blue patch shown. |
| Head / Interface | Confirm head diameter, countersink angle, cross recess, driver size, seating depth and access. |
| Thread / Mating Part | Machine thread shown; confirm diameter, pitch, length, tolerance, engagement and patch position. |
| Current Appearance | Bright metallic appearance and blue thread patch shown; confirm material, finish, patch system and service condition. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm mating tapped hole or nut, countersunk seat, engagement, locking requirement and tightening method. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw or connector drawings, joint section and mating-part specification. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, connectors, mating parts and approved finish samples. |
| Custom Thread Range | Machine-thread components from M1 to M12 can be reviewed where compatible with the confirmed subtype, mating thread, head geometry and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed where compatible with the confirmed diameter, head geometry, engagement, manufacturing route and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Protective bags or trays can be reviewed to protect the countersunk head and prevent patch contamination. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample made to the proposed geometry, thread, finish and packaging specification. |
Applications
| Flush-mounted joints with locking requirements | Match countersink geometry, mating thread, patch and engagement to the assembly. |
|---|---|
| Equipment cover and panel installation | Confirm driver access, head seating and backside clearance. |
| Service replacement fasteners | Evaluate patch compatibility with the actual tapped hole or mating nut. |
| OEM screw packs | Control part code, patch protection, count, label and package position. |
Buyer Guide
| How is flush seating checked? | Review head angle, diameter, recess, countersink profile and depth together. |
|---|---|
| What must be confirmed for the blue patch? | Specify patch system, position, coverage, mating thread, torque test and installation cycles. |
| Can the photo confirm adhesive performance? | No. Performance requires a defined test with representative mating parts. |
| Does bright color confirm stainless steel? | No. Confirm material grade and finish separately. |
Quality Control
| Countersunk head | Inspect angle, diameter, cross recess, seating surface and driver fit. |
|---|---|
| Thread and patch | Check thread geometry, patch position, coverage, adhesion and cleanliness. |
| Assembly trial | Verify hand start, engagement, flush seating, tightening, removal and required torque behavior. |
| Pack audit | Verify item code, patch protection, count, label and carton marks. |
Packaging & Customization
| Packaging Format | Protective bags or trays can be reviewed to protect the countersunk head and prevent patch contamination. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final geometry, thread, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can thread and length be customized? | Machine-thread components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, head geometry, mating thread, engagement, manufacturing route and purchase specification. |
| How is flush seating checked? | Review head angle, diameter, recess, countersink profile and depth together. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Protective bags or trays can be reviewed to protect the countersunk head and prevent patch contamination. |
| What is required for quotation? | Send the screw or connector drawing or sample, mating part, joint stack, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Thread diameter, pitch, tolerance and length |
| RFQ 3 | Head diameter, angle, recess and driver size |
| RFQ 4 | Mating thread, countersink and engagement |
| RFQ 5 | Material, finish, patch system and torque criteria |
| RFQ 6 | Quantity, patch protection, label and cartons |
MOQ: 10,000 pcs per confirmed specification
