Silver Socket Head Cap Machine Screw with Blue Patch — Silver socket head cap machine screw forms shown with a blue patch on part of the threaded area. Final thread, length, head, material, finish, mating part, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Silver socket head cap machine screw forms shown with a blue patch on part of the threaded area. |
|---|---|
| Purchasing Position | Custom machine-thread component requiring geometry, mating-thread and assembly confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Silver Socket Head Cap Machine Screw with Blue Patch |
|---|---|
| Current Product Configuration | Silver socket head cap machine screw forms shown with a blue patch on part of the threaded area. |
| Primary Form | Cylindrical cap head with an internal-hex drive, machine thread and localized blue thread patch shown. |
| Head / Interface | Confirm head diameter and height, socket geometry, hex-key size, seating face and clearance. |
| Thread / Mating Part | Machine thread shown; confirm diameter, pitch, length, tolerance, engagement and patch position. |
| Current Appearance | Bright metallic appearance and blue thread patch shown; confirm material, finish, patch system and service condition. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm mating tapped hole or nut, engagement, prevailing-torque requirement, head clearance and tightening method. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw or connector drawings, joint section and mating-part specification. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, connectors, mating parts and approved finish samples. |
| Custom Thread Range | Machine-thread components from M1 to M12 can be reviewed where compatible with the confirmed subtype, mating thread, head geometry and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed where compatible with the confirmed diameter, head geometry, engagement, manufacturing route and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Protective bags or trays can be reviewed to prevent patch contamination, mixed part numbers and socket damage. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample made to the proposed geometry, thread, finish and packaging specification. |
Applications
| Threaded assemblies requiring a locking patch | Confirm mating thread, engagement, patch system and torque acceptance method. |
|---|---|
| Machine and fixture joints | Match cap-head clearance, tool access and seating to the assembly drawing. |
| Furniture hardware with threaded inserts | Verify insert compatibility, engagement and patch behavior through trials. |
| OEM service packs | Control part identity, patch protection, count, label and package closure. |
Buyer Guide
| How is the blue thread patch specified? | State patch material, position, coverage, mating thread and required installation behavior. |
|---|---|
| Can prevailing torque be assumed? | No. Define the test method, mating part, engagement, installation cycles and limits. |
| What clearance is required for the head? | Confirm surrounding diameter, height, seating face and hex-key access. |
| Does appearance identify the material? | No. Confirm material and finish in the purchase specification. |
Quality Control
| Head and socket | Inspect cap-head dimensions, socket depth, tool fit and seating face. |
|---|---|
| Thread and patch | Check diameter, pitch, tolerance, patch position, coverage and adhesion. |
| Mating and torque trial | Verify hand start, engagement, tightening, removal and required cycle behavior. |
| Packaging control | Verify part number, patch protection, count, label and carton identification. |
Packaging & Customization
| Packaging Format | Protective bags or trays can be reviewed to prevent patch contamination, mixed part numbers and socket damage. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final geometry, thread, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can thread and length be customized? | Machine-thread components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, head geometry, mating thread, engagement, manufacturing route and purchase specification. |
| How is the blue thread patch specified? | State patch material, position, coverage, mating thread and required installation behavior. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Protective bags or trays can be reviewed to prevent patch contamination, mixed part numbers and socket damage. |
| What is required for quotation? | Send the screw or connector drawing or sample, mating part, joint stack, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Thread diameter, pitch, tolerance and length |
| RFQ 3 | Head dimensions, socket size and clearance |
| RFQ 4 | Mating thread, engagement and torque test method |
| RFQ 5 | Material, finish, patch system and environment |
| RFQ 6 | Quantity, patch protection, label and cartons |
MOQ: 10,000 pcs per confirmed specification
