Silver Torx Pan Head Machine Screw with Blue Patch — Silver Torx pan head machine screw forms shown with a blue patch on part of the threaded area. Final thread, length, head, material, finish, mating part, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Silver Torx pan head machine screw forms shown with a blue patch on part of the threaded area. |
|---|---|
| Purchasing Position | Custom machine-thread component requiring geometry, mating-thread and assembly confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Silver Torx Pan Head Machine Screw with Blue Patch |
|---|---|
| Current Product Configuration | Silver Torx pan head machine screw forms shown with a blue patch on part of the threaded area. |
| Primary Form | Low rounded pan head with an internal star drive, machine thread and localized blue thread patch shown. |
| Head / Interface | Confirm head diameter and height, Torx recess, tool size, seating face and surrounding clearance. |
| Thread / Mating Part | Machine thread shown; confirm diameter, pitch, length, tolerance, engagement and patch position. |
| Current Appearance | Bright metallic appearance and blue thread patch shown; confirm material, finish, patch system and acceptance criteria. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm mating tapped hole or nut, engagement, prevailing-torque requirement, seating and installation method. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw or connector drawings, joint section and mating-part specification. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, connectors, mating parts and approved finish samples. |
| Custom Thread Range | Machine-thread components from M1 to M12 can be reviewed where compatible with the confirmed subtype, mating thread, head geometry and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed where compatible with the confirmed diameter, head geometry, engagement, manufacturing route and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Protective bags or trays can be reviewed to prevent patch contamination, mixed part numbers and head damage. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample made to the proposed geometry, thread, finish and packaging specification. |
Applications
| Assemblies requiring controlled loosening resistance | Confirm the mating thread, patch system, engagement and torque evaluation method. |
|---|---|
| Equipment cover and panel joints | Match head clearance, Torx access and seating to the assembly drawing. |
| Service replacement fasteners | Supply the mating thread and representative joint for patch compatibility review. |
| OEM component packs | Separate part numbers and protect the patch under approved count and label controls. |
Buyer Guide
| What does the blue area indicate? | It is a photographed thread patch; confirm its material, position, coverage and required behavior in the purchase specification. |
|---|---|
| Can a torque value be quoted from the photo? | No. Define the mating thread, engagement, test method, cycles and acceptance limits. |
| How is the Torx size selected? | Use the approved head drawing and installation tool requirement. |
| Does the bright appearance confirm stainless steel? | No. Confirm material grade and finish separately. |
Quality Control
| Head and drive | Inspect head geometry, star recess, tool fit and seating face. |
|---|---|
| Thread and patch | Check thread geometry, patch position, coverage, adhesion and contamination. |
| Mating trial | Evaluate hand start, engagement, seating, tightening and removal with representative threads. |
| Pack audit | Verify item code, patch protection, count, package closure, label and cartons. |
Packaging & Customization
| Packaging Format | Protective bags or trays can be reviewed to prevent patch contamination, mixed part numbers and head damage. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final geometry, thread, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can thread and length be customized? | Machine-thread components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, head geometry, mating thread, engagement, manufacturing route and purchase specification. |
| What does the blue area indicate? | It is a photographed thread patch; confirm its material, position, coverage and required behavior in the purchase specification. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Protective bags or trays can be reviewed to prevent patch contamination, mixed part numbers and head damage. |
| What is required for quotation? | Send the screw or connector drawing or sample, mating part, joint stack, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Thread diameter, pitch, tolerance and length |
| RFQ 3 | Head geometry, Torx size and clearance |
| RFQ 4 | Mating thread, engagement and torque test requirement |
| RFQ 5 | Material, finish, patch system and environment |
| RFQ 6 | Quantity, patch protection, label and packaging |
MOQ: 10,000 pcs per confirmed specification
