Black Cross-Drive Wide Truss-Head Machine Screw — Black screws shown with broad low-profile truss heads, cross recesses, full machine threads and blunt ends. Final thread, length, head, material, finish, mating part, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Black screws shown with broad low-profile truss heads, cross recesses, full machine threads and blunt ends. |
|---|---|
| Purchasing Position | Custom machine-thread component requiring geometry, mating-thread and assembly confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Black Cross-Drive Wide Truss-Head Machine Screw |
|---|---|
| Current Product Configuration | Black screws shown with broad low-profile truss heads, cross recesses, full machine threads and blunt ends. |
| Primary Form | Wide-head machine screw intended to spread bearing contact over a confirmed bracket, sheet or equipment-panel joint. |
| Head / Interface | Confirm truss-head diameter, height and underside profile, cross-drive type and depth, bearing surface, washer requirement and tool clearance. |
| Thread / Mating Part | Confirm machine-thread diameter, pitch and class, threaded length, end form, mating thread and minimum engagement. |
| Current Appearance | Uniform black surface is shown; confirm base material, black finish system, corrosion requirement, color range and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm the mating nut, insert or tapped hole, joint stack, clearance hole, seating surface, driver and buyer-specified tightening method. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw or connector drawings, joint section and mating-part specification. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, connectors, mating parts and approved finish samples. |
| Custom Thread Range | Machine-thread components from M1 to M12 can be reviewed where compatible with the confirmed subtype, mating thread, head geometry and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed where compatible with the confirmed diameter, head geometry, engagement, manufacturing route and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample made to the proposed geometry, thread, finish and packaging specification. |
Applications
| Equipment enclosure assembly | Match the wide head and mating thread to the panel stack. |
|---|---|
| Slotted-frame fastening | Confirm head bearing, slot width and tool clearance. |
| Furniture hardware joints | Coordinate the head envelope with adjacent fittings. |
| OEM black fastener packs | Control thread variants, count, labels and finish protection. |
Buyer Guide
| Why use the wide truss head? | Approve the bearing area and low head profile against the actual joint and surrounding clearance. |
|---|---|
| Which mating-thread data are required? | Provide the nut, insert or tapped-hole thread, class, engagement and joint stack. |
| Can the photographed size define production? | No. Confirm dimensions and tolerances by drawing, sample or purchase specification. |
| Does the black color define performance? | No. State the finish process, appearance range, environment and acceptance criteria. |
Quality Control
| Truss head and drive | Inspect diameter, height, underside profile, recess and burrs. |
|---|---|
| Machine thread | Check diameter, pitch, class, length, end profile and damage. |
| Joint assembly trial | Verify head seating, tool access, engagement and buyer-specified tightening test. |
| Black finish and pack audit | Confirm surface, color range, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final geometry, thread, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can thread and length be customized? | Machine-thread components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, head geometry, mating thread, engagement, manufacturing route and purchase specification. |
| Why use the wide truss head? | Approve the bearing area and low head profile against the actual joint and surrounding clearance. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw or connector drawing or sample, mating part, joint stack, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Truss-head, drive and thread specification |
| RFQ 3 | Mating thread and joint stack |
| RFQ 4 | Clearance hole, seating surface and driver access |
| RFQ 5 | Material, black finish and acceptance criteria |
| RFQ 6 | Quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
