Cam Lock with Plastic-Sleeved Connector Bolt — Metal eccentric cam shown with a connector bolt carrying a grey sleeve and a separate white polymer insert. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Metal eccentric cam shown with a connector bolt carrying a grey sleeve and a separate white polymer insert. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Cam Lock with Plastic-Sleeved Connector Bolt |
|---|---|
| Current Product Configuration | Metal eccentric cam shown with a connector bolt carrying a grey sleeve and a separate white polymer insert. |
| Primary Form | Furniture panel connector combining a metal cam with a sleeved bolt and a mating polymer insert. |
| Head / Interface | Confirm cam capture cavity, bolt head and neck, grey sleeve profile and retention, white insert bore and component projection. |
| Thread / Mating Part | Threaded bolt sections shown; confirm each thread form, diameter, pitch, length, mating part and engagement. |
| Current Appearance | Metallic cam and bolt with grey and white polymer components shown; confirm materials, finish, resins and colors. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm face bore, edge hole, insert hole, centerline, sleeve position, bolt projection, cam direction and installation sequence. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Matched component sets can be reviewed with sleeve protection, controlled ratios, instructions and compartment separation. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Panel joints using a sleeved bolt | Confirm sleeve retention, spacing and fit with the actual panel hole. |
|---|---|
| Cabinet and wardrobe assembly | Coordinate drilling, bolt projection and cam capture. |
| Replacement furniture fittings | Compare cam, sleeved bolt, insert and drilled panel together. |
| OEM connector kits | Protect polymer parts and control matched component counts. |
Buyer Guide
| What is the grey sleeve used for? | Its function must be confirmed for retention, spacing, panel fit or installation behavior. |
|---|---|
| How are both polymer parts specified? | Define each profile, bore, retention feature, material, color and installation location. |
| Can thread engagement be chosen from length alone? | No. Include mating part, shoulders, sleeve and installed projection. |
| How is cam engagement checked? | Verify bolt-head geometry, projection, capture path and closing travel. |
Quality Control
| Cam and bolt geometry | Inspect cam cavity, bolt head, neck, shank, threads and shoulders. |
|---|---|
| Polymer components | Check dimensions, position, retention, molding condition and damage. |
| Panel installation | Verify hole fit, projection, capture, closing and release. |
| Set audit | Confirm ratio, protection, instruction, label and compartments. |
Packaging & Customization
| Packaging Format | Matched component sets can be reviewed with sleeve protection, controlled ratios, instructions and compartment separation. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| What is the grey sleeve used for? | Its function must be confirmed for retention, spacing, panel fit or installation behavior. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Matched component sets can be reviewed with sleeve protection, controlled ratios, instructions and compartment separation. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Cam, bolt and insert drawings or samples |
|---|---|
| RFQ 2 | Cam capture and bolt-head geometry |
| RFQ 3 | Threads, sleeves, shoulders and projection |
| RFQ 4 | Panel material, thickness, holes and centerline |
| RFQ 5 | Metal finish, polymer materials and joint test |
| RFQ 6 | Set quantity, component ratio and packaging |
MOQ: 10,000 pcs per confirmed specification
