Three-Part Furniture Cam Lock Connector Set — Metal eccentric cam, headed connector bolt and white polymer insert shown as a coordinated furniture connector set. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Metal eccentric cam, headed connector bolt and white polymer insert shown as a coordinated furniture connector set. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Three-Part Furniture Cam Lock Connector Set |
|---|---|
| Current Product Configuration | Metal eccentric cam, headed connector bolt and white polymer insert shown as a coordinated furniture connector set. |
| Primary Form | Three-component panel connector combining an eccentric cam, double-interface connector bolt and polymer insert or sleeve. |
| Head / Interface | Confirm cam capture path, bolt head and neck, insert bore and retention, and every component shoulder and projection. |
| Thread / Mating Part | Threaded bolt sections shown; confirm each thread form, diameter, pitch, length, mating insert or panel and engagement. |
| Current Appearance | Bright metallic cam and bolt with white polymer insert shown; confirm materials, finishes, resin and color. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel thickness, face bore, edge hole, insert hole, centerlines, bolt projection, cam orientation and installation sequence. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Matched three-part sets or compartment kits can be reviewed with controlled component ratios and installation instructions. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Three-part cabinet panel joints | Coordinate cam, bolt, insert and drilling as one approved assembly. |
|---|---|
| Knock-down furniture kits | Control component sequence, matched count and installation instructions. |
| Panel joints using a polymer insert | Verify insert retention, bolt engagement and panel condition. |
| Replacement connector programs | Compare all three original components and the drilled panels. |
Buyer Guide
| Can one component be changed independently? | Only after its interfaces with the other two components and panel holes are revalidated. |
|---|---|
| How is the polymer insert specified? | Confirm outside shape, bore, retention, material, color and installation hole. |
| Which bolt dimensions control engagement? | Head, neck, shoulders, threaded sections and installed projection must be reviewed together. |
| Can joint strength be inferred from the parts? | No. Define the complete joint and test method. |
Quality Control
| Cam, bolt and insert geometry | Inspect every mating profile, shoulder, thread and retention feature. |
|---|---|
| Panel-hole fit | Verify cam bore, insert hole, edge drilling and centerline relationship. |
| Assembly sequence | Check insertion, bolt engagement, cam capture, closing and release. |
| Set audit | Verify three-part ratio, item identity, instructions, label and compartments. |
Packaging & Customization
| Packaging Format | Matched three-part sets or compartment kits can be reviewed with controlled component ratios and installation instructions. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Can one component be changed independently? | Only after its interfaces with the other two components and panel holes are revalidated. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Matched three-part sets or compartment kits can be reviewed with controlled component ratios and installation instructions. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Complete set drawings or approved samples |
|---|---|
| RFQ 2 | Cam, bolt and insert interface details |
| RFQ 3 | All threads, shoulders and installed projections |
| RFQ 4 | Panel material, thickness, holes and centerlines |
| RFQ 5 | Metal finishes, insert resin and joint test |
| RFQ 6 | Set quantity, component ratio and packaging |
MOQ: 10,000 pcs per confirmed specification
