Purple Cam Lock and Threaded Connector Dowel — Purple round cam lock bodies shown with bright metallic headed connector dowels having coarse panel threads. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Purple round cam lock bodies shown with bright metallic headed connector dowels having coarse panel threads. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Purple Cam Lock and Threaded Connector Dowel |
|---|---|
| Current Product Configuration | Purple round cam lock bodies shown with bright metallic headed connector dowels having coarse panel threads. |
| Primary Form | Two-part furniture connector using an eccentric plastic cam and a headed threaded dowel. |
| Head / Interface | Confirm cam profile and capture path together with dowel head, neck, shank, shoulder and installed projection. |
| Thread / Mating Part | Coarse panel thread shown on the dowel; confirm diameter, profile, length, pilot hole, panel material and engagement. |
| Current Appearance | Purple cam and bright metallic dowel appearances shown; confirm cam resin and color, dowel material and finish. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel thickness, face bore, edge hole, centerline, dowel pilot hole, projection, cam orientation and tightening direction. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Matched cam-and-dowel kits or compartment packs can be reviewed with controlled component ratios and instructions. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Knock-down cabinet joints | Coordinate drilling, dowel projection and cam orientation with the panel drawing. |
|---|---|
| Colored hidden connector systems | Approve the cam shade and visible recess against a physical sample. |
| Replacement furniture connectors | Compare the original cam, dowel and panel machining. |
| OEM connector kits | Control matched counts, item codes, instructions and compartments. |
Buyer Guide
| How are cam and dowel compatibility checked? | Review dowel-head geometry, installed projection, capture path and closing travel together. |
|---|---|
| How is the pilot hole selected? | Use the confirmed thread profile, panel material, edge distance and installation trial. |
| Can joint strength be inferred from the components? | No. Define the complete panel joint and test method. |
| Does purple color identify the cam material? | No. Confirm resin and color system separately. |
Quality Control
| Cam body | Inspect body dimensions, ribs, recess, capture geometry and color. |
|---|---|
| Connector dowel | Check head, neck, shank, shoulder, thread and finish. |
| Panel assembly | Verify pilot hole, projection, capture, closing travel and release. |
| Kit audit | Check matched count, appearance, instructions, label and compartments. |
Packaging & Customization
| Packaging Format | Matched cam-and-dowel kits or compartment packs can be reviewed with controlled component ratios and instructions. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| How are cam and dowel compatibility checked? | Review dowel-head geometry, installed projection, capture path and closing travel together. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Matched cam-and-dowel kits or compartment packs can be reviewed with controlled component ratios and instructions. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Cam and dowel drawings or samples |
|---|---|
| RFQ 2 | Cam profile and dowel-head engagement |
| RFQ 3 | Dowel thread, length, pilot hole and projection |
| RFQ 4 | Panel material, thickness and drilling dimensions |
| RFQ 5 | Cam resin and color, dowel material and finish |
| RFQ 6 | Kit quantity, component ratio and packaging |
MOQ: 10,000 pcs per confirmed specification
