Black Cross-Drive Countersunk Self-Tapping Screw — Black pointed screws shown with flat countersunk heads, cross recesses and full coarse external threads in several photographed lengths. Final head, drive, thread, point, dimensions, substrate, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Black pointed screws shown with flat countersunk heads, cross recesses and full coarse external threads in several photographed lengths. |
|---|---|
| Purchasing Position | Custom screw component requiring thread, point, substrate, hole and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Black Cross-Drive Countersunk Self-Tapping Screw |
|---|---|
| Current Product Configuration | Black pointed screws shown with flat countersunk heads, cross recesses and full coarse external threads in several photographed lengths. |
| Primary Form | Countersunk self-tapping screw intended to seat in a matching recess after the substrate, pilot hole and engagement are confirmed. |
| Head / Interface | Confirm head diameter and angle, head height, cross-drive form and depth, seating face, under-head transition and driver access. |
| Thread / Mating Part | Confirm diameter, pitch or thread form, threaded length, point geometry, pilot-hole requirement, substrate and required engagement. |
| Current Appearance | Black surface appearance is shown; confirm base material, finish process, color range, corrosion requirement and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm substrate, pilot or clearance hole, fixture thickness, countersink, driver, tightening method and buyer-specified installation test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw drawings, substrate information, pilot-hole or clearance-hole details and joint section. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, substrates, mating parts and approved finish samples. |
| Custom Diameter / Thread Range | Self-tapping, wood-screw or drywall-screw diameters from M1 to M12 can be reviewed only where compatible with the confirmed thread form, point, head, substrate and manufacturing route. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed only where compatible with the confirmed diameter, thread form, point, head, engagement, substrate and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed thread, point, head, finish, substrate and packaging specification. |
Applications
| Flush furniture fittings | Match the head angle, pilot hole and engagement to the prepared joint. |
|---|---|
| Cabinet and enclosure hardware | Confirm substrate, edge distance, fixture hole and driver access. |
| Black decorative assemblies | Approve the visible-head color and surface against a sample. |
| OEM counted fastener packs | Control screw identity, count, label and surface protection. |
Buyer Guide
| What defines the countersunk seat? | Specify head diameter, angle, height and the prepared recess geometry. |
|---|---|
| How is the pilot hole selected? | Use the actual substrate, thread form, engagement and approved installation trial. |
| Can the photographed length define production? | No. Confirm length and tolerances by drawing, sample or purchase specification. |
| Can black color identify the finish? | No. Confirm the finish process, corrosion requirement and approved color sample. |
Quality Control
| Head and recess | Inspect angle, diameter, height, recess, edges and seating face. |
|---|---|
| Thread and point | Check thread form, pitch, length, point geometry and damage. |
| Installation trial | Verify driving, seating, engagement and the buyer-specified test in the approved substrate. |
| Variant and pack audit | Confirm size identity, finish, count, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final head, drive, thread, point, dimensions, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can diameter and length be customized? | Diameters from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to the confirmed screw subtype, thread form, point, head, substrate, engagement and manufacturing route. |
| What defines the countersunk seat? | Specify head diameter, angle, height and the prepared recess geometry. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the screw drawing or sample, substrate and hole specification, joint section, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Head, drive, thread, point and dimensions |
| RFQ 3 | Substrate, pilot hole, fixture and engagement |
| RFQ 4 | Material, finish and corrosion requirement |
| RFQ 5 | Installation method and acceptance criteria |
| RFQ 6 | Variant quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
