Silver Cross-Drive Pan Head Machine Screw — Bright silver cross-drive pan head machine screw forms shown as small component groups. Final thread, length, head, material, finish, mating part, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Bright silver cross-drive pan head machine screw forms shown as small component groups. |
|---|---|
| Purchasing Position | Custom machine-thread component requiring geometry, mating-thread and assembly confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Silver Cross-Drive Pan Head Machine Screw |
|---|---|
| Current Product Configuration | Bright silver cross-drive pan head machine screw forms shown as small component groups. |
| Primary Form | Low rounded pan head with a cross recess and short machine-thread body shown. |
| Head / Interface | Confirm head diameter and height, cross recess, driver size, seating face and surrounding clearance. |
| Thread / Mating Part | Machine thread shown; confirm diameter, pitch, length, tolerance, engagement and end geometry. |
| Current Appearance | Bright silver appearance shown; confirm base material, finish system and service environment. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm mating tapped hole or nut, engagement, joint stack, clearance and tightening method. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw or connector drawings, joint section and mating-part specification. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, connectors, mating parts and approved finish samples. |
| Custom Thread Range | Machine-thread components from M1 to M12 can be reviewed where compatible with the confirmed subtype, mating thread, head geometry and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed where compatible with the confirmed diameter, head geometry, engagement, manufacturing route and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Protective bags, trays or private-label packs can be reviewed with size, count and part-number identification. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample made to the proposed geometry, thread, finish and packaging specification. |
Applications
| General threaded hardware assemblies | Match the screw thread, head clearance and engagement to the joint drawing. |
|---|---|
| Panel and equipment fastening | Confirm seating face, driver access and backside clearance. |
| Furniture hardware with threaded inserts | Verify insert thread, engagement, head seating and tightening method. |
| OEM component packs | Separate sizes under controlled counts, labels and protective packaging. |
Buyer Guide
| Is the photographed material confirmed as stainless steel? | No. Material grade and documentation require purchase-specification confirmation. |
|---|---|
| How is driver size selected? | Use the approved head and recess drawing together with the installation tool. |
| How should length be selected? | Use joint stack, mating-thread depth, required engagement and bottom clearance. |
| Can different sizes share one package? | Only with approved item codes, counts and separation that prevent mixing. |
Quality Control
| Pan head and recess | Inspect head dimensions, cross recess, driver fit and seating face. |
|---|---|
| Thread geometry | Check diameter, pitch, length, tolerance, lead and end form. |
| Surface appearance | Compare coverage and visible defects with the approved sample. |
| Assembly and pack trial | Verify mating fit, seating, tightening, removal, identification and count. |
Packaging & Customization
| Packaging Format | Protective bags, trays or private-label packs can be reviewed with size, count and part-number identification. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final geometry, thread, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can thread and length be customized? | Machine-thread components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, head geometry, mating thread, engagement, manufacturing route and purchase specification. |
| Is the photographed material confirmed as stainless steel? | No. Material grade and documentation require purchase-specification confirmation. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Protective bags, trays or private-label packs can be reviewed with size, count and part-number identification. |
| What is required for quotation? | Send the screw or connector drawing or sample, mating part, joint stack, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Thread diameter, pitch, tolerance and length |
| RFQ 3 | Head dimensions, recess and driver size |
| RFQ 4 | Mating thread, engagement and joint stack |
| RFQ 5 | Material, finish and service environment |
| RFQ 6 | Quantity, size separation, label and cartons |
MOQ: 10,000 pcs per confirmed specification
