Multicolor Internal-Hex Flange-Head Machine Bolt — Long multicolor internal-hex flange-head machine bolt forms shown as an arranged sample group and a loose component group. Final thread, length, head, material, finish, mating part, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Long multicolor internal-hex flange-head machine bolt forms shown as an arranged sample group and a loose component group. |
|---|---|
| Purchasing Position | Custom machine-thread component requiring geometry, mating-thread and assembly confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Multicolor Internal-Hex Flange-Head Machine Bolt |
|---|---|
| Current Product Configuration | Long multicolor internal-hex flange-head machine bolt forms shown as an arranged sample group and a loose component group. |
| Primary Form | Long shank with an internal-hex flange-style head and multiple visible threaded sections shown. |
| Head / Interface | Confirm head and flange geometry, socket size, shank transitions, tool access and seating face. |
| Thread / Mating Part | Machine-thread sections shown; confirm every threaded position, diameter, pitch, tolerance, length and mating component. |
| Current Appearance | Blue, purple, gold and iridescent-looking surface appearance shown; confirm material, finish system, shade and service environment. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm each mating thread, joint stack, shank clearance, seating, tightening method and service requirement. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw or connector drawings, joint section and mating-part specification. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, connectors, mating parts and approved finish samples. |
| Custom Thread Range | Machine-thread components from M1 to M12 can be reviewed where compatible with the confirmed subtype, mating thread, head geometry and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed where compatible with the confirmed diameter, head geometry, engagement, manufacturing route and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Protective trays, separated bags or private-label packs can be reviewed to prevent contact damage and mixed lengths or finishes. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample made to the proposed geometry, thread, finish and packaging specification. |
Applications
| Custom mechanical linkages | Confirm all thread sections, unthreaded shank, head seating and mating components. |
|---|---|
| Decorative equipment assemblies | Approve the multicolor finish, visible surfaces and service environment. |
| Special joint development samples | Submit the full assembly section and representative mating parts for review. |
| OEM replacement or service packs | Control geometry, finish, count, part identity and protective packaging. |
Buyer Guide
| Can the geometry be defined from the photo? | No. Provide a drawing that identifies every thread section, shank transition, head and overall length. |
|---|---|
| Does the appearance confirm titanium? | No. Material grade and documentation must be stated in the purchase specification. |
| How is mating fit reviewed? | Supply each tapped component or nut, engagement requirement, joint stack and installation method. |
| Can multiple colors share one pack? | Yes, after each finish, part number, quantity and pack position is approved. |
Quality Control
| Head and flange geometry | Inspect head, flange, socket, seating face and tool fit. |
|---|---|
| Threaded sections | Check each diameter, pitch, tolerance, location, runout and end form. |
| Shank and finish | Inspect transitions, straightness, visible surface and approved color appearance. |
| Full assembly trial | Verify mating, seating, tightening, removal, identification and protective packaging. |
Packaging & Customization
| Packaging Format | Protective trays, separated bags or private-label packs can be reviewed to prevent contact damage and mixed lengths or finishes. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final geometry, thread, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can thread and length be customized? | Machine-thread components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, head geometry, mating thread, engagement, manufacturing route and purchase specification. |
| Can the geometry be defined from the photo? | No. Provide a drawing that identifies every thread section, shank transition, head and overall length. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Protective trays, separated bags or private-label packs can be reviewed to prevent contact damage and mixed lengths or finishes. |
| What is required for quotation? | Send the screw or connector drawing or sample, mating part, joint stack, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Complete bolt drawing or approved sample |
|---|---|
| RFQ 2 | Every thread diameter, pitch, tolerance and location |
| RFQ 3 | Head, flange, socket, shank and overall geometry |
| RFQ 4 | All mating components, joint stack and tool access |
| RFQ 5 | Material, finish sample and service environment |
| RFQ 6 | Quantity by version, protective pack, label and cartons |
MOQ: 10,000 pcs per confirmed specification
