Two-Piece Plastic and Metal Shelf Support Fitting — White polymer shelf-support housings shown with a cross-drive metal locking insert and a separate silver-toned metal variant. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | White polymer shelf-support housings shown with a cross-drive metal locking insert and a separate silver-toned metal variant. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Two-Piece Plastic and Metal Shelf Support Fitting |
|---|---|
| Current Product Configuration | White polymer shelf-support housings shown with a cross-drive metal locking insert and a separate silver-toned metal variant. |
| Primary Form | Recessed two-piece shelf fitting combining a shaped housing with a metal locking or bearing component. |
| Head / Interface | Confirm housing outline and recess, shelf-contact lip, metal insert, drive opening, mating feature, installed depth and clearance. |
| Thread / Mating Part | Confirm any screw or cam thread and engagement from the approved fitting drawing and mating component. |
| Current Appearance | White polymer housings and a silver-toned metal variant are shown; confirm materials, finish and approved color. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel and shelf materials, recess and holes, orientation, insertion sequence, driver access and test method. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after component identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Cabinet shelf connections | Match housing and insert to the shelf and panel machining. |
|---|---|
| Concealed knock-down furniture | Confirm installation sequence and later driver access. |
| Replacement support fittings | Compare housing, insert, recess and shelf contact. |
| OEM cabinet hardware kits | Control component ratio, variant, instructions and labels. |
Buyer Guide
| What machining information is required? | Provide recess and hole dimensions, depths, centerlines and panel sections. |
|---|---|
| How is the metal insert retained? | Confirm the housing interface, insertion direction and locking method. |
| Can the white housing material be assumed? | No. Confirm polymer, color and service environment. |
| What should an assembly trial include? | Use the proposed fitting with production-representative panels and shelf. |
Quality Control
| Polymer housing | Inspect outline, recess interface, lip, drive access, color and molding condition. |
|---|---|
| Metal component | Check geometry, drive, thread or cam interface, finish and fit. |
| Furniture trial | Verify machining, insertion, locking, shelf contact and specified test. |
| Pair and pack audit | Confirm component ratio, variant, count, instructions and label. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after component identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| What machining information is required? | Provide recess and hole dimensions, depths, centerlines and panel sections. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment packs or private-label cartons can be reviewed after component identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Housing and metal-component drawings or samples |
|---|---|
| RFQ 2 | Panel and shelf machining and sections |
| RFQ 3 | Insert, drive and locking interfaces |
| RFQ 4 | Shelf contact and installed clearance |
| RFQ 5 | Polymer, color, metal material and finish |
| RFQ 6 | Pair quantity, instructions, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
