Colored Furniture Cam Lock and Connector Screw Set — Colored round cam locks shown with matching cross-drive connector screws in several sample colors. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Colored round cam locks shown with matching cross-drive connector screws in several sample colors. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Colored Furniture Cam Lock and Connector Screw Set |
|---|---|
| Current Product Configuration | Colored round cam locks shown with matching cross-drive connector screws in several sample colors. |
| Primary Form | Two-part furniture connector set with an eccentric cam body and compatible connector screw or dowel. |
| Head / Interface | Confirm cam diameter and height, recess, internal capture form, connector head, shank and installed projection. |
| Thread / Mating Part | Connector screw thread shown; confirm thread form, diameter, pitch, length, panel material and pilot or mating hole. |
| Current Appearance | Multiple colored sample finishes shown; confirm cam and screw materials, color system, shade and acceptance sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel thickness, face bore, edge hole, centerline, connector projection, cam orientation and closing direction. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Matched cam-and-screw kits, compartment boxes or private-label packs can be reviewed with approved color and component ratios. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Color-matched flat-pack furniture | Approve the cam and screw shade together with the panel finish sample. |
|---|---|
| Cabinet and wardrobe connector kits | Coordinate drilling, component projection and cam orientation with the panel drawing. |
| Display and decorative furniture | Review visible color, recess appearance and protective packaging. |
| OEM multi-color hardware packs | Separate colors and matched pairs under controlled item codes and counts. |
Buyer Guide
| Can the color be matched to a panel sample? | Yes. Submit the physical color reference and define the inspection lighting and acceptable variation. |
|---|---|
| How are the cam and connector screw paired? | Confirm connector-head geometry, installed projection, cam capture path and panel-hole centerline. |
| Can joint performance be inferred from color or size? | No. Define the complete panel joint and required test method. |
| What must a kit specification include? | List each component, color, quantity, label, compartment and carton requirement. |
Quality Control
| Cam and screw geometry | Inspect cam profile, connector head, shank, thread and mating relationship. |
|---|---|
| Color agreement | Compare both components with the approved sample under the defined inspection condition. |
| Panel assembly trial | Verify drilling fit, insertion, orientation, closing travel, joint pull-up and release. |
| Kit audit | Check matched pairs, colors, counts, labels and compartment separation. |
Packaging & Customization
| Packaging Format | Matched cam-and-screw kits, compartment boxes or private-label packs can be reviewed with approved color and component ratios. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Can the color be matched to a panel sample? | Yes. Submit the physical color reference and define the inspection lighting and acceptable variation. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Matched cam-and-screw kits, compartment boxes or private-label packs can be reviewed with approved color and component ratios. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Cam and connector screw drawings or samples |
|---|---|
| RFQ 2 | Cam profile and connector-head engagement |
| RFQ 3 | Thread, installed projection and panel holes |
| RFQ 4 | Panel material, thickness, drilling and assembly direction |
| RFQ 5 | Material, color system and approved sample |
| RFQ 6 | Kit quantity, color ratio, label and packaging |
MOQ: 10,000 pcs per confirmed specification
