Gold-Toned Combination-Drive Pan Head Machine Screw — Gold-toned short pan head machine screw forms shown with a combination slot and cross recess and a blunt threaded end. Final thread, length, head, material, finish, mating part, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Gold-toned short pan head machine screw forms shown with a combination slot and cross recess and a blunt threaded end. |
|---|---|
| Purchasing Position | Custom machine-thread component requiring geometry, mating-thread and assembly confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Gold-Toned Combination-Drive Pan Head Machine Screw |
|---|---|
| Current Product Configuration | Gold-toned short pan head machine screw forms shown with a combination slot and cross recess and a blunt threaded end. |
| Primary Form | Low rounded pan head with a combination drive, short machine thread and blunt end shown. |
| Head / Interface | Confirm head diameter and height, slot and cross-recess geometry, driver choice, seating face and clearance. |
| Thread / Mating Part | Machine thread shown; confirm diameter, pitch, length, tolerance, engagement and end geometry. |
| Current Appearance | Gold-toned metallic appearance shown; confirm base material, finish system, color and service environment. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm mating tapped hole or nut, engagement, joint stack, driver access and tightening method. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw or connector drawings, joint section and mating-part specification. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, connectors, mating parts and approved finish samples. |
| Custom Thread Range | Machine-thread components from M1 to M12 can be reviewed where compatible with the confirmed subtype, mating thread, head geometry and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed where compatible with the confirmed diameter, head geometry, engagement, manufacturing route and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Protective separated bags, trays or private-label packs can be reviewed to prevent head damage and mixed part numbers. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample made to the proposed geometry, thread, finish and packaging specification. |
Applications
| Serviceable threaded assemblies | Confirm the approved driver, mating thread, engagement and tightening method. |
|---|---|
| Furniture and fixture hardware | Match head clearance, seating face and thread engagement to the assembly. |
| Decorative visible fasteners | Approve the gold-toned finish and head appearance against a representative sample. |
| OEM component packs | Separate part numbers and finishes under controlled counts and labels. |
Buyer Guide
| Is this a self-tapping screw? | The photographed part shows a blunt machine-thread form. Confirm the tapped hole or mating nut in the purchase specification. |
|---|---|
| How is the combination drive specified? | Provide the approved slot, cross-recess and driver geometry or a representative sample. |
| Does the gold tone confirm copper material? | No. Confirm base material and finish system separately. |
| How is length selected? | Use the joint stack, mating-thread depth, required engagement and bottom clearance. |
Quality Control
| Head and drive | Inspect head dimensions, slot and cross recess, tool fit and seating face. |
|---|---|
| Thread geometry | Check diameter, pitch, length, tolerance, lead and blunt-end form. |
| Finish appearance | Compare color, coverage and visible defects with the approved sample. |
| Mating trial | Verify hand start, engagement, seating, tightening and removal. |
Packaging & Customization
| Packaging Format | Protective separated bags, trays or private-label packs can be reviewed to prevent head damage and mixed part numbers. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final geometry, thread, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can thread and length be customized? | Machine-thread components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, head geometry, mating thread, engagement, manufacturing route and purchase specification. |
| Is this a self-tapping screw? | The photographed part shows a blunt machine-thread form. Confirm the tapped hole or mating nut in the purchase specification. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Protective separated bags, trays or private-label packs can be reviewed to prevent head damage and mixed part numbers. |
| What is required for quotation? | Send the screw or connector drawing or sample, mating part, joint stack, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Thread diameter, pitch, tolerance and length |
| RFQ 3 | Head dimensions and combination-drive geometry |
| RFQ 4 | Mating thread, engagement and joint stack |
| RFQ 5 | Material, finish, color and service environment |
| RFQ 6 | Quantity, head protection, label and cartons |
MOQ: 10,000 pcs per confirmed specification
