Hidden Furniture Cam Lock and Connector Dowel — Purple hidden cam lock bodies shown with bright metallic headed connector dowels for furniture panel joints. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Purple hidden cam lock bodies shown with bright metallic headed connector dowels for furniture panel joints. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Hidden Furniture Cam Lock and Connector Dowel |
|---|---|
| Current Product Configuration | Purple hidden cam lock bodies shown with bright metallic headed connector dowels for furniture panel joints. |
| Primary Form | Concealed eccentric cam and threaded dowel system for drawing two drilled furniture panels together. |
| Head / Interface | Confirm cam diameter, height, recess, capture slot and dowel head, neck, shoulder and installed projection. |
| Thread / Mating Part | Coarse dowel thread shown; confirm thread geometry, engagement, pilot hole and compatibility with the panel material. |
| Current Appearance | Purple cam and bright metallic dowel shown; confirm materials, color and finish against approved samples. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm face bore, edge hole, centerline, panel thickness, dowel pilot hole, insertion, cam direction and joint closing. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Matched cam-and-dowel bags, kits or private-label packs can be reviewed with approved instructions and counts. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Concealed cabinet panel joints | Keep the cam below the visible panel surface and confirm access for tightening. |
|---|---|
| Flat-pack furniture assemblies | Coordinate hole positions, dowel projection and installation sequence. |
| Wood panel connector systems | Confirm pilot hole and engagement for the actual panel material. |
| Replacement hardware sets | Submit the existing cam, dowel and drilled panel for matching. |
Buyer Guide
| What makes the connector hidden? | The cam and dowel sit inside prepared panel holes; final visibility depends on the joint design. |
|---|---|
| How is the dowel projection controlled? | Use the shoulder, thread engagement, pilot-hole depth and panel section. |
| Can one drilling pattern fit every cam? | No. Face bore, edge hole and centerline must match the approved component set. |
| What should the assembly sample include? | Use production-representative panels, drilling and final mating components. |
Quality Control
| Cam geometry | Inspect body, ribs, recess, capture slot and orientation. |
|---|---|
| Dowel geometry | Check head, neck, shoulder, shank, thread and straightness. |
| Hidden-joint trial | Verify drilling fit, access, capture, pull-up and release. |
| Packaging control | Check matched count, item identity, instruction, label and protection. |
Packaging & Customization
| Packaging Format | Matched cam-and-dowel bags, kits or private-label packs can be reviewed with approved instructions and counts. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| What makes the connector hidden? | The cam and dowel sit inside prepared panel holes; final visibility depends on the joint design. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Matched cam-and-dowel bags, kits or private-label packs can be reviewed with approved instructions and counts. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Cam and dowel drawings or samples |
|---|---|
| RFQ 2 | Cam bore and dowel-head interface |
| RFQ 3 | Dowel thread, pilot hole and installed projection |
| RFQ 4 | Panel material, thickness, holes and centerline |
| RFQ 5 | Materials, color, finish and joint test |
| RFQ 6 | Quantity, component ratio, label and packaging |
MOQ: 10,000 pcs per confirmed specification
