Zinc-Alloy Glass Shelf Support Clip Options — Several photographed shelf-support designs with metal locating pegs, formed ledges and black or translucent contact pads. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Several photographed shelf-support designs with metal locating pegs, formed ledges and black or translucent contact pads. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Zinc-Alloy Glass Shelf Support Clip Options |
|---|---|
| Current Product Configuration | Several photographed shelf-support designs with metal locating pegs, formed ledges and black or translucent contact pads. |
| Primary Form | Cabinet shelf support options using a panel peg and ledge or cushioned contact to support a shelf edge. |
| Head / Interface | Confirm peg diameter and length, ledge geometry, pad or sleeve profile, shelf contact, panel hole and installed projection. |
| Mating Part | Confirm according to drawing, sample or purchase specification. |
| Current Appearance | Bright metallic bodies with black or translucent contact components are shown; confirm metal finish, pad material and color. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm cabinet panel, hole, shelf material and thickness, clip orientation, contact position, spacing and test method. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, compartment cases or private-label packs can be reviewed after the component list, quantities, labels and carton protection are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Glass cabinet shelves | Approve cushioned contact and edge support against the actual glass. |
|---|---|
| Wood and board shelves | Match peg, ledge and projection to the panel and shelf. |
| Replacement shelf supports | Compare panel hole, shelf contact and installed projection. |
| OEM cabinet hardware packs | Control selected variant, count, labels and protective separation. |
Buyer Guide
| Which photographed support is being quoted? | Identify the selected variant and provide its drawing or representative sample. |
|---|---|
| What panel-hole information is needed? | Specify hole diameter, depth, tolerance, panel material and edge distance. |
| What must be confirmed for glass shelves? | Provide glass thickness, edge condition, contact location and required test method. |
| Can the pad color or material be changed? | Options can be reviewed after function, hardness, color and retention are confirmed. |
Quality Control
| Metal support body | Inspect peg, ledge, formed features, edges and finish. |
|---|---|
| Pad or sleeve | Check profile, retention, surface condition, material and color. |
| Cabinet trial | Verify panel-hole fit, shelf contact, clearance, spacing and specified test. |
| Variant and pack audit | Confirm selected type, count, separation, label and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, compartment cases or private-label packs can be reviewed after the component list, quantities, labels and carton protection are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Which photographed support is being quoted? | Identify the selected variant and provide its drawing or representative sample. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, compartment cases or private-label packs can be reviewed after the component list, quantities, labels and carton protection are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Selected support drawing or approved sample |
|---|---|
| RFQ 2 | Panel material, hole diameter, depth and tolerance |
| RFQ 3 | Shelf material, thickness and edge condition |
| RFQ 4 | Peg, ledge, pad and installed projection |
| RFQ 5 | Metal finish, pad material, color and test |
| RFQ 6 | Quantity, variant separation, label and packaging |
MOQ: 10,000 pcs per confirmed specification
