Glass Shelf Support Pin with Clear Cushion — Bright metal cabinet shelf-support pins shown with locating pegs and clear polymer cushioning contacts in several support-body configurations. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Bright metal cabinet shelf-support pins shown with locating pegs and clear polymer cushioning contacts in several support-body configurations. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Glass Shelf Support Pin with Clear Cushion |
|---|---|
| Current Product Configuration | Bright metal cabinet shelf-support pins shown with locating pegs and clear polymer cushioning contacts in several support-body configurations. |
| Primary Form | Push-in shelf support combining a cabinet locating peg, metal bearing body and clear cushioning contact. |
| Head / Interface | Confirm peg diameter and length, body profile, shelf ledge, cushion diameter and thickness, installed projection and clearances. |
| Mating Part | Confirm according to drawing, sample or purchase specification. |
| Current Appearance | Bright metal bodies with clear polymer contacts are shown; confirm metal, finish, cushion resin, clarity and approved sample. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm cabinet panel material and hole, shelf material and thickness, insertion direction, support spacing, cushion contact and buyer test. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Bulk, counted bags, retail bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Glass cabinet shelves | Confirm cushion contact, edge clearance and support spacing with the actual glass. |
|---|---|
| Display and bathroom cabinets | Review material and finish for the confirmed environment. |
| Replacement shelf supports | Compare peg, body, cushion and installed projection. |
| OEM cabinet hardware packs | Control selected variant, count, separation and labels. |
Buyer Guide
| Which support variant is required? | Identify the metal body, peg and clear cushion by drawing or approved sample. |
|---|---|
| How is the cabinet hole selected? | Use peg diameter, insertion depth, panel material and hole tolerance. |
| Can load capacity be inferred from the photo? | No. Define shelf material, size, support spacing, cabinet and buyer test. |
| What must be confirmed about the cushion? | Specify resin, geometry, clarity, retention and contact requirement. |
Quality Control
| Metal support body | Inspect peg, ledge, profile, edges, straightness and finish. |
|---|---|
| Clear cushion | Check dimensions, molding condition, retention, clarity and surface. |
| Cabinet and shelf trial | Verify insertion, seating, projection, shelf contact and specified test. |
| Variant and pack audit | Confirm selected form, count, separation, labels and protection. |
Packaging & Customization
| Packaging Format | Bulk, counted bags, retail bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| Which support variant is required? | Identify the metal body, peg and clear cushion by drawing or approved sample. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Bulk, counted bags, retail bags, blister packs, compartment cases or private-label cartons can be reviewed after part identity, quantity, protection, labels and artwork are approved. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Selected support drawing or sample |
|---|---|
| RFQ 2 | Peg, body, cushion and projection |
| RFQ 3 | Panel material, hole and tolerance |
| RFQ 4 | Shelf material, thickness, size and spacing |
| RFQ 5 | Metal finish, cushion resin and environment |
| RFQ 6 | Quantity, labels and packaging |
MOQ: 10,000 pcs per confirmed specification
