Purple Plastic Furniture Cam Lock — Purple polymer-looking round cam lock bodies shown from front, rear, side and capture-cavity orientations. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Purple polymer-looking round cam lock bodies shown from front, rear, side and capture-cavity orientations. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Purple Plastic Furniture Cam Lock |
|---|---|
| Current Product Configuration | Purple polymer-looking round cam lock bodies shown from front, rear, side and capture-cavity orientations. |
| Primary Form | Round ribbed cam body with an open capture slot, metal driver insert and eccentric engagement path. |
| Head / Interface | Confirm body diameter and height, ribs, open slot, driver insert, capture geometry, orientation and matching dowel head. |
| Thread / Mating Part | Confirm the separate connector dowel or screw, its thread or shank, installed projection and panel engagement. |
| Current Appearance | Purple polymer-looking body and metallic driver insert shown; confirm resin, color, insert material and service condition. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel thickness, face bore, edge hole, centerline, insertion direction, dowel projection and closing travel. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Protective bags or matched kits can be reviewed to prevent rib damage, color mixing and missing mating components. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Hidden cabinet panel joints | Coordinate cam slot, bore and dowel projection with the panel section. |
|---|---|
| Color-matched furniture hardware | Approve the purple body against a physical finish sample. |
| Flat-pack connector kits | Control cam orientation, matched dowel quantity and installation instructions. |
| Replacement furniture fittings | Compare the original cam, panel holes and mating dowel. |
Buyer Guide
| What controls retention in the panel bore? | Body diameter, ribs, bore geometry, panel material and insertion method must be tested together. |
|---|---|
| Can the purple color be approved from a screen image? | No. Use a physical sample and defined inspection condition. |
| How is the mating dowel verified? | Check head capture, installed projection, cam rotation and joint pull-up. |
| Does the photo prove a specific resin? | No. Confirm resin and service requirements in the purchase specification. |
Quality Control
| Plastic body | Inspect dimensions, ribs, slot, surface and visible molding defects. |
|---|---|
| Driver insert | Check insert position, recess geometry, retention and tool fit. |
| Panel and dowel trial | Verify insertion, rotation, capture, pull-up and release. |
| Color and pack audit | Compare shade and verify count, item code, label and protection. |
Packaging & Customization
| Packaging Format | Protective bags or matched kits can be reviewed to prevent rib damage, color mixing and missing mating components. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| What controls retention in the panel bore? | Body diameter, ribs, bore geometry, panel material and insertion method must be tested together. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Protective bags or matched kits can be reviewed to prevent rib damage, color mixing and missing mating components. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Cam drawing or approved sample |
|---|---|
| RFQ 2 | Body, ribs, slot and driver-insert details |
| RFQ 3 | Panel material, thickness and face bore |
| RFQ 4 | Edge hole, centerline and mating dowel |
| RFQ 5 | Resin, color sample and service environment |
| RFQ 6 | Quantity, matched parts, label and packaging |
MOQ: 10,000 pcs per confirmed specification
