Silver Cross-Drive Countersunk Machine Screw with Blue Patch — Silver cross-drive countersunk machine screw forms shown with a localized blue patch on part of the thread. Final thread, length, head, material, finish, mating part, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Silver cross-drive countersunk machine screw forms shown with a localized blue patch on part of the thread. |
|---|---|
| Purchasing Position | Custom machine-thread component requiring geometry, mating-thread and assembly confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Silver Cross-Drive Countersunk Machine Screw with Blue Patch |
|---|---|
| Current Product Configuration | Silver cross-drive countersunk machine screw forms shown with a localized blue patch on part of the thread. |
| Primary Form | Flat countersunk head with a cross recess, machine thread and localized blue patch shown. |
| Head / Interface | Confirm head diameter, countersink angle, cross recess, driver size, seating depth and tool access. |
| Thread / Mating Part | Machine thread shown; confirm diameter, pitch, length, tolerance, engagement, end form and patch position. |
| Current Appearance | Bright metallic appearance and blue thread patch shown; confirm material, finish, patch system and service condition. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm mating tapped hole or nut, countersunk seat, engagement, patch requirement and tightening method. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with screw or connector drawings, joint section and mating-part specification. |
|---|---|
| Made-to-Sample | Available for comparison with representative screws, connectors, mating parts and approved finish samples. |
| Custom Thread Range | Machine-thread components from M1 to M12 can be reviewed where compatible with the confirmed subtype, mating thread, head geometry and application. |
| Custom Length Range | Lengths from 3 mm to 200 mm can be reviewed where compatible with the confirmed diameter, head geometry, engagement, manufacturing route and purchase specification. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Protective separated bags or trays can be reviewed to protect the countersunk heads and prevent patch contamination. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample made to the proposed geometry, thread, finish and packaging specification. |
Applications
| Flush-mounted threaded joints | Match head angle, countersink profile, mating thread and engagement to the joint drawing. |
|---|---|
| Assemblies requiring a thread patch | Define the patch system, position, mating thread, test method and acceptance limits. |
| Equipment covers and panels | Confirm driver access, seating depth, joint stack and backside clearance. |
| OEM screw packs | Control part code, patch protection, count, label and package closure. |
Buyer Guide
| How is flush seating checked? | Review head angle, head diameter, countersink profile, recess and depth together. |
|---|---|
| What must be specified for the blue patch? | State patch material, position, coverage, mating thread, installation cycles and required test. |
| Can a torque value be assumed from the photo? | No. Define the mating part, engagement, test method and acceptance limits. |
| Does the bright appearance confirm stainless steel? | No. Confirm material grade and finish separately. |
Quality Control
| Countersunk head | Inspect angle, diameter, recess, seating surface and driver fit. |
|---|---|
| Thread and patch | Check thread geometry, patch position, coverage, adhesion and cleanliness. |
| Assembly trial | Verify hand start, engagement, flush seating, tightening and removal with representative mating parts. |
| Pack audit | Verify item code, patch protection, count, label and carton identification. |
Packaging & Customization
| Packaging Format | Protective separated bags or trays can be reviewed to protect the countersunk heads and prevent patch contamination. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed screw configuration? | No. The gallery records the current photographed configuration. Final geometry, thread, material, finish, quantity and packaging require an approved drawing, sample or purchase specification. |
|---|---|
| Can thread and length be customized? | Machine-thread components from M1 to M12 and lengths from 3 mm to 200 mm can be reviewed according to subtype, head geometry, mating thread, engagement, manufacturing route and purchase specification. |
| How is flush seating checked? | Review head angle, head diameter, countersink profile, recess and depth together. |
| Which finishes can be reviewed? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Protective separated bags or trays can be reviewed to protect the countersunk heads and prevent patch contamination. |
| What is required for quotation? | Send the screw or connector drawing or sample, mating part, joint stack, material and finish requirement, installation method, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Screw drawing or approved sample |
|---|---|
| RFQ 2 | Thread diameter, pitch, tolerance and length |
| RFQ 3 | Head diameter, angle, recess and driver size |
| RFQ 4 | Mating thread, countersink, engagement and test method |
| RFQ 5 | Material, finish, patch system and service condition |
| RFQ 6 | Quantity, patch protection, label and cartons |
MOQ: 10,000 pcs per confirmed specification
