Shelf Support Pins with Protective Caps — Metal cylindrical shelf support pins shown with pointed self-tapping threads and removable white or clear protective caps. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require confirmation.
Product Overview
| Photographed Configuration | Metal cylindrical shelf support pins shown with pointed self-tapping threads and removable white or clear protective caps. |
|---|---|
| Purchasing Position | Furniture connector or support assembly requiring panel, hole, mating-component and installation confirmation. |
| Order Boundary | Photographed colors, dimensions and quantities do not define the production order. |
| Quotation Basis | Approved drawing or sample, mating part or panel, installation conditions, quantity, packaging and acceptance criteria. |
Specifications & Custom Capability
Current Product Configuration
| Product Type | Shelf Support Pins with Protective Caps |
|---|---|
| Current Product Configuration | Metal cylindrical shelf support pins shown with pointed self-tapping threads and removable white or clear protective caps. |
| Primary Form | Cylindrical shelf-contact body with a cross-drive end, pointed threaded mounting section and optional cap. |
| Head / Interface | Confirm support diameter and projection, drive recess, contact face, cap inside and outside fit and shelf clearance. |
| Thread / Mating Part | Pointed self-tapping thread shown; confirm profile, diameter, length, pilot hole, panel material and installation method. |
| Current Appearance | Bright metallic pins with white and clear-looking caps shown; confirm pin finish, cap resin, color and transparency. |
| Material | Confirm according to drawing, sample or purchase specification. |
| Installation | Confirm panel thickness, pilot-hole diameter and depth, edge distance, driving access, orientation, cap position and shelf contact. |
| Dimensions & Tolerances | Confirm according to drawing, sample or purchase specification. |
Custom Manufacturing & Order Review
| Made-to-Drawing | Available for review with component drawings, panel-hole specification, joint section and mating-component details. |
|---|---|
| Made-to-Sample | Available for comparison with representative connectors, panels, mating parts and approved finish samples. |
| Component Geometry | Cam, pin, support body, sleeve, connector head, shank, shoulder and panel interfaces can be reviewed against the approved furniture joint. |
| Threaded Component Range | Threaded screws or dowels from M1 to M12 can be reviewed only where compatible with the confirmed furniture assembly, material, geometry and installation method. |
| Threaded Component Length | Threaded screws or dowels from 3 mm to 200 mm can be reviewed only where compatible with the confirmed panel, joint, engagement and manufacturing route. |
| Finish Options | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Packaging & Private Label | Pins and caps can be supplied as matched sets with controlled ratios, colors, labels and compartment separation. |
| MOQ | 10,000 pcs per confirmed specification |
| Samples | Request a representative sample with the proposed components, panels, holes, finish and packaging specification. |
Applications
| Cabinet shelf support points | Match pin projection, cap and shelf contact to the side panel. |
|---|---|
| Wardrobe adjustable shelving | Confirm drilling pattern, board thickness and installation access. |
| Visible shelf hardware | Approve the cap color or transparency against the shelf sample. |
| Furniture repair kits | Match the existing pin, pilot hole, cap and support quantity. |
Buyer Guide
| What is the cap used for? | Its function must be confirmed for the intended shelf contact, appearance and retention requirement. |
|---|---|
| How is the pilot hole selected? | Use the confirmed thread profile, panel material, thickness and installation trial. |
| Can shelf load be claimed from the image? | No. Define shelf span, panel, support layout and test method. |
| How is cap retention checked? | Verify insertion, fit, rotation, removal and service condition on the actual pin. |
Quality Control
| Support pin | Inspect body, projection, drive, thread, point and finish. |
|---|---|
| Protective cap | Check dimensions, color, transparency, retention and surface. |
| Panel installation | Verify pilot-hole fit, driving, seating, alignment and panel condition. |
| Shelf assembly | Evaluate the complete support layout using the specified test method. |
Packaging & Customization
| Packaging Format | Pins and caps can be supplied as matched sets with controlled ratios, colors, labels and compartment separation. |
|---|---|
| Identification | Use approved item codes, quantities, labels, barcodes and carton marks. |
| Component Protection | Prevent mixed parts, movement and visible-surface damage through the confirmed pack design. |
| Private Label | Submit approved artwork, language, barcode data and legal marking requirements before production. |
Frequently Asked Questions
| Is the order limited to the photographed furniture component? | No. The gallery records the current photographed configuration. Final component geometry, panel and hole interfaces, mating parts, material, finish, quantity and packaging require an approved drawing or sample. |
|---|---|
| Can the furniture connector or support geometry be customized? | Component geometry can be reviewed against the confirmed panel, hole layout, mating parts and installation method. M1 to M12 threads and 3 mm to 200 mm lengths apply only to compatible screw or dowel components after technical review. |
| What is the cap used for? | Its function must be confirmed for the intended shelf contact, appearance and retention requirement. |
| Which finishes can be reviewed for metallic components? | Zinc plating, Ruspert coating, spray painting, electrophoretic coating, blackening, gold plating, silver plating and copper plating can be reviewed only where compatible with the confirmed base material, geometry, service environment and acceptance requirement. |
| Can the package and label be customized? | Pins and caps can be supplied as matched sets with controlled ratios, colors, labels and compartment separation. |
| What is required for quotation? | Send the component and panel drawings or samples, hole specification, mating parts, installation method, material and finish requirement, quantity and packaging artwork. MOQ starts at 10,000 pcs per confirmed specification. |
Need a Custom Quote?
Send a drawing or sample and the confirmed assembly requirements. JH Fix will review manufacturing compatibility, sample scope and quotation details.
| RFQ 1 | Pin and cap drawings or samples |
|---|---|
| RFQ 2 | Support diameter, projection and contact face |
| RFQ 3 | Thread profile, point, pilot hole and panel |
| RFQ 4 | Cap dimensions, material, color and retention |
| RFQ 5 | Pin material, finish and assembly test |
| RFQ 6 | Set quantity, cap ratio, label and packaging |
MOQ: 10,000 pcs per confirmed specification
